foam stock mod
 

hi Ijust wanted to know if anyone has ever done the "foam stock mod" from (http://www.airsoftretreat.com/review...uct=216&cat=49)

And I wanted to know how did it go, some tricks to do it, where were your difficulties, and was it worth it (or did it break your stock)

thx alot

Take LOW EXPANDING Foam insulation and spray it in the stock and let it expand.

Once it's dry, neaten it up with an Xacto knife.

Yea It's worth it. Reduced the noise on my VSR-10 by quite a bit.

The guide they gave you is WAY too complicated.

You don't need to drill holes or anything like that.. just use low-expanding foam insulation and spray it in, let it expand and dry, then neaten it up.

and does it feels good?

I...I think I love you Amos.

+1.... :wink:

Bullshit, I love him more!

On that note, about the VSR-10, does anyone know where to find new hop up units? Or do they even exist. I tried to disassemble my Well MB03 like usual, but as I opened up my hop-up chamber, the plastic piece that pushes down on the hop-up rubber flew out and broke.
Or more to the point do companies sell small pieces like that?


http://groups.google.com/group/asgar...ssembly-guides

step 14, 3rd pic

wow, now this is gonna turn into a fight on who loves Amos more.... dang

You're better off just getting a Marui hop unit set from Dentrinity. You'll have to take the inner barrel out and switch it with the original, but the Well hop-up unit is crap. I opened mine up and the hole where the screw for the external hop adjustment lever was mashed to hell. Or get a Marui, you are in the States... :P

This sounds like something I want to do. Where does one get such foam? Hardware store, like Home Depot or something?

Yep... just specify low expansion.

try the brand Great Stuff