King Arms M4 Magazines in ICS M4
 

Hey guys, I've looked everywhere and I can't seem to confirm if a King Arms M4 mag will fit an ICS M4. I know the ICS M4 mag well is slightly thinner so I'm wondering how the King Arms mags sit. Thanks in advance.

They work fine.. I have some. Just buy that box set of 10 you seen and you will be happy.

I have them for my ICS M4 and never had a problem that wasn't easily fixed. I found one mag that had some trouble seating in the gun cause of an "off" corner of the mag but a file fixed that in about 5seconds.

i have used almost every magazine made in my ics with zero complaint. i have to give props to my star mags,,plastic design but tougher than a $2 dollar truck stop steak in tennesse! they are almost 3 years old and have pieces missing, and one of the feed tubes has half of it shot off but they still feed like they were new.

http://s41.photobucket.com/albums/e2...t=d982b17d.pbw

Thanks guys, I'm purchasing a box of 5 King Arms mid-caps :)

king arms midcaps are plastic... just so you know.

Well sorry to revive this thread but the mags came today. I'm very happy with the quality for the price. However I have encountered a problem with at least one mag (haven't tried the other 4 yet) not feeding well and I found if I hold the mag in a certain position in the mag well it will be fine. I figure it just needs some tape not to wobble. I'm going to stick some electric tape on it tomorrow.

try a drop of silicon lube on the follower on the mag and then load it up.. it will free itself nicely.

Don't have any at the moment but I'll get some and give it a shot before I tape. What brand/type do you recommend? Will this work even though it looks like the problem is where the mag is seated?

Try prying up a little on the upper part of the mag catch well on the mag. Use a large flat-blade screwdriver or similar tool. Not too much though, or the mag won't be easy to insert.

http://i227.photobucket.com/albums/d...nbravo/mag.jpg

A little electrical tape around the top seems to have fixed all feeding issues. It doesn't fall out of the M4 when I hit the mag release now but I suppose that's not a bad thing either.