Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   AUSCAM (https://airsoftcanada.com/showthread.php?t=51377)

Sterling January 25th, 2008 19:24

AUSCAM
 
So I have been searching high and low for a supplier of AUSCAM or DCPU whatever you want to call it. Can anyone point me in the right direction?

Kwokwai January 25th, 2008 19:32

eBay. Otherwise Digger Militaria, Soldier's Shop or other surplus place in Australia that has a web presence.

Vince January 25th, 2008 20:19

Ebay but there isn't much there, I tried Ebay.com.au but almost none of the sellers are willing to ship outside of Australia

Danke January 25th, 2008 20:26

I've been trying to keep an eye on eBay by it looks like it's most pouches and odds and ends that turn up there.

These guys are said to be a good source for clothing, http://www.wellingtonsurplus.com.au/

And then there's here for pouches etc., http://www.platatac.com/

Kwokwai January 25th, 2008 21:38

http://www.sordaustralia.com generally has higher quality gear than platatac. I have kit from both manufacturers and prefer SORD's products over Platatac.

rooks January 26th, 2008 18:59

What are you looking for, specifically?

Sterling January 27th, 2008 11:02

I am looking to make an AUSCAM load out. So Shirt, Pants, Hat, and a vest of any sort.

I also noticed that platatac has like a digi AUSCAM. NO one uses those right?

Danke January 27th, 2008 13:42

I'd get this as it comes with the world famous Canadian style buttons we all know and love. http://www.kitbag.com.au/prod932.htm

There is a lot out there when you search, but not much cheap. There's an Italian guy in the Aussie sub forum who has tons, you could PM him for info.

A trip down under might wind up being the best idea, or lurking on the buy and sell here for a used set.

As an edit I'd like to add another set of pants, a jacket, and a camelbak carrier to mine along with a set of the desert Auscam just in case someone chimes in with "well I have something I don't use".

Kwokwai January 27th, 2008 20:52

Quote:

Originally Posted by Danke (Post 626086)
I'd get this as it comes with the world famous Canadian style buttons we all know and love. http://www.kitbag.com.au/prod932.htm

I just want the jacket; already got a set of GoreTex/Emphatex rain pants.

rooks January 28th, 2008 03:57

Quote:

Originally Posted by Sterling (Post 625986)
I am looking to make an AUSCAM load out. So Shirt, Pants, Hat, and a vest of any sort.

I also noticed that platatac has like a digi AUSCAM. NO one uses those right?


I'll check the local Surplus joints next time I'm that way. What sizes are you looking for? I can't promise anything, as the good quality new Issue stuff they get goes pretty quick ... but I can check it out.

That Digital Auscam that Platatac makes isn't an 'official' pattern. It's not in use by any Govt. Department. It's just something they decided to put onto the market themselves.

Sterling January 28th, 2008 09:27

I am a 28 waist so it'll probably be a medium pants and probably a medium jacket. I am 5'6 and weight about 125lbs.

Danke January 28th, 2008 12:04

I'm 5'11" x 190 lbs. What's that L, XL?

Kwokwai January 28th, 2008 12:45

Quote:

Originally Posted by Sterling (Post 626728)
I am a 28 waist so it'll probably be a medium pants and probably a medium jacket. I am 5'6 and weight about 125lbs.

More like a small-regular which is what I use if I can't find a small-short. I'm a 29" waist, 130lbs and 5'5".

Sterling January 28th, 2008 15:42

My ACU's are Mediums and so is my Flecktarn and they fit just fine.

rooks January 28th, 2008 21:31

Just so you all know ... DPCU's are sized in CM's. Not inches, or L, XL etc.


All times are GMT -4. The time now is 08:22.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.