Inner Barrel Length on G36
 

Does anyone have the actual length of the inner barrel on a G36? Not the G36C or K variants. I already know the C size. Thanks in advance.

What make of g36 you have? I see a few sizes listed using google for 494mm to 509 to 550 depending eg deepfire have a few lengths.

Hmm I know the G36C inner barrel is 247mm so those numbers seem closer to right. I assumed (re. when I assume I make an ASS out of U and ME) that the G36 model is a standard length. After more hunting from your tip I gather the 509 is right thanks m8.

Typically:

G36- 495mm
G36K- 357mm
G36C- 247mm

It'll vary slightly based on the manufacturer, but they should all be similar if not identical.

To make sure, suggest you take the barrel assembly out and just measure it. That way there is no guessing. It is not even that hard taking it apart.

Here is the g36c version I used for Prometheus 6.03 barrel upgrade. Taking the barrel assembly out in less than a few minutes.
http://www.urizenproject.net/airsoft/g36cbarrel/

I used a 509mm for an M16 for my full sized G36. Works like a charm.

495mm is the original length, 509mm is the closest size tighbore you can get, so it will stick out inside the flash hider.

Awesome feedback folks thanks. :)