looking to upgrade sr-16?
 

delete

Hurricane spring guide (you will need to cut down the stock bolt about 1/2inch or so.. measure first.

Prometheus MS120SP Spring

Area 1000 Bushings

Honestly I had this setup on my last TM SR-16 and it ran 390.

Oh and a Systema tightbore 6.04. SR-16 Length.. Also had a G&P Ops Silencer 12" on the front

awesome thanks. was hoping not to have to cut anything. but hell y not.

Well when you put it all together and put the stock on and the bolt in it will stick out a bit.. so what you do is mark it off where the bolt starts to go inside the stock and unscrew the bolt and measure from the bottom of the head to the line and then cut that much if not a bit more to compensate for the hurricane spring guide not having a full opening on it.. and the stock will be nice and snug after.. make sure to file the little bur left over too.

alrighty. thankyou.

Get an SR 15/25 frontend and perhaps put an m16 inner barrel in it. With a bipod/scope/silencer it makes for a pretty awesome looking sniper platform. In a pinch, or with a carry handle, it makes a nice m16a4-esque assault rifle. I'm assuming this will be an outdoor gun at that velocity, so the longer barrel won't be much of a handicap.

I dont' have a classified ad listed, but there's a spare SR15 frontend kicking around my room. If you want to see what it looks like, email or PM me or something.

Good luck,

EDITED