2005 Mk.23
 

Hey everyone, i must say that the search feature is on ASC is much better than i thought. Not only did i learn about the different between the 2005 and previous models of the Mk.23, but i also know how they are different. the one question i had that i couldn't find was whether or not the NEW Mk.23 models are set up like the single recoil spring setup or the more realistic model with the 2 stage recoil spring setup. So, if i were to buy the HW & HK KSC Mk.23 from 007 come June, would i get a 2005 "unrealistic", or a "realistic" version?

Thanks,

Donster 125

P.S: Here is the link to 007, but you will have to scroll down.

http://www.007airsoft.com/products/htm/gas-ksc.htm

I believe this is the one with the recoil-reduction system.

BTW.. have you actually talked to ken about this? LIC, they were all back-ordered for close to 7 months..

If you look on WGC and other HK sites the normal heavy weight model is listed as sold out and the rest are out of stock.

Looks like I might have to cancel my order from A&A.

im not planning to buy anytime soon. all i wanted to know was whether or not the newer version have the 2 spring or the single spring with regards to their recoil setup.

Single spring on Mk.23 no double springs unlike the USP models. Vice versa on real steel and on KSC.

sorry im a bit confused. i am talking about a KSC Mk.23 i understood what you said until you said that ^^^

Oops, what I mean is that KSC copy exactly like real Mk.23 and USP on their replica GBB version.

To finalize your question, the KSC Mk.23 recoil spring is only one not double. Trust me I had 2005 version Mk.23

My ex,

http://www.airsoftcanada.com/gallery...to=2458&cat=41

Recommend upgrades;

Shooter Design Mk.23 Phase 3 Metal Slide and barrel
Guarder Upgraded recoil and hammer spring for KSC Mk.23

the earlier ones had a different blowback chamber and featured the dual stage recoil spring assembly

they changed a bunch of stuff around in the 2k5 ver

yuu speaks the truth
I owned the same MK23 he is talking about
nice thing about the guarder kit is (I believe) it also comes with a reinforced part 66
=p

Cause that's was mine before Dan sold it to you LOL Where did it go by the way? I want that back!

I think I own that socom now if I am thinking of the right one

First I built it then I sold it to Dan Ocha then he sold to Shinjin and then I don't know lol

Well i bought the one from Shinjin that had internal upgrades and the metal slide little over a year ago

Funny thing, I have the earlier model KSC MK23 according to one exploded parts diagram I have, and compared it to what UNC has as a diagram for the Airsoft Surgeon 380 upgrade kit. Mine has the dual spring recoil system, and the solid steel recoil spring guide as shown in the early diagram, but it doesn't have the basic blowback system as shown in said diagram, it has the same thing as what the UNC diagram has for the 380 kit.

BTW, I have the 380 kit en route and I'll post up what I think of it, testing and such. At first I didn't think I'd be able to use much form the upgrade kit due to the differences betwen diagrams, then I realized the old diagram isn't the same as I have except for the dual spring/one piece rod.

Oh, seen a couple posts in the US that state the two peice recoil rod has a tendancy to break. Am glad mine is a solid chunk of good steel!

I had the one piece recoil guide that blew apart after about a dozen shots. I put one of the 2 piece ones in and never had a problem since.

Sounds like my gun lol