P226 hammer spring + Lever position ?!?
 

Hey, I'm in a big trouble to assemble my P226 after changing my hammer spring... my cat throw my GBB on the floor, the spring got off... wreckage !

Anyway, I'm not able to find the good position for the piece 61 inside the hammer chamber !

Also, the piece 42, the little spring on the side of the grip, I just don't know how to fit it ! Can anybody help me on this please ? Thanks !

The hammer just cock, but that's all I get... the hammer don't go off by pressing the trigger ! Aegh !?!?!

http://www.airsoftcanada.com/attachm...9&d=1156518799

Is that the correct position of the spring ? Found this image to help myself to rebuilt my baby :(

Also, on the P226 diagram :

http://tech.airsoftcanada.com/TM/TM%...26diagram4.jpg

Piece #61, the tip of the little lever, I just don't know where to put it inside the hammer chamber...

ahh, trigger is no fun at all, but actually pretty simple. That spring on the outside. one side pushes up the trigger bar, doesnt attach to it, keep that in mind, and the other side just catches in to the side of the body, and the grip holds it in place.

oh, and peice 61, is a bitch to fit in, but I found out exactly where it goes, you want to put the top of it up in the middle of the hammer, then lock it in place, should work smoothly.

Does the hammer needs to be cock or uncock to do this ? In the middle of the hammer right ? Cause the hammer spring got no tension on the way I'm fitting it in ! May not be in place though...

Ok, I found the position of the piece 61. Somehow, when I pull the trigger, the hammer goes back, but doesn't go forward after. A little piece I misplace ? There is not much piece to misplace, I didn't dissamble the trigger chamber... :( Dammit !

Yeah ! Shit ! I found the solution ! Thanks to this link !

http://www.airsoftcanada.com/showthr...t=p226+diagram

Yep, hammer needs to be cocked back, then you slip the bent rounded tip of that peice up right in the middle of the hammer, put the spring on the rod, and lock it in place, then it should fire normal.

Does anyone can show me in picturem how to place the little spring in piece #69 ? I'm not able to put the grip without a little wobble cause it seems to be misplace ! Argh ! The trigger release works, but the lever don't go at its initial position. Got to put it back ! :(