Fitting SR-25 Stock...
 

I've been inside plenty of M4's, and I'm assuming the SR-25 will be similar at the very least, so Ill be at least competent, but I've never worked with M4 buttstocks before, and Id like to attach Magpul's adjustable prescision rifle stock
http://www.wgcshop.com/pcart/shopper...SBK_cat_Stocks

to an SR. Im also assuming the stock mounts are the same, but since I've never taken M4 stocks apart, I was wondering if someone with good knowledge of M4 stocks might have some general info on how I might go about installing this beast.

PS - I know ill have to get an external batt, and do some re-wiring, as the CA batt is supposed to be housed in the full stock that comes with it. And I know Airsoft Surgeon produces this model with the stock already mounted, but doing it myself would be like literally at least 1000 USD less, so if I could avoid buying the Surgeon that would be dank.

I can take a picture of my TM M4's stock disassembled if that helps?

please
 

yeah yeah. I dont have an M4 at the moment... sold all of mine.

thanks much

http://aycu26.webshots.com/image/231...6885093_rs.jpg

http://aycu20.webshots.com/image/232...7000424_rs.jpg

http://aycu08.webshots.com/image/237...2713601_rs.jpg

there ya go

dont mind the taping on the inside of the stock, I did it myself to stop the wobbling.

needs a real stock adaptor and like you said rewired to front using something like an AN/PEQ2

Thats a lot, man. For goin through all that. Big help mate.