Airsoft Canada - Kings Arms metal hop up installation on TM lower?

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)

- - Kings Arms metal hop up installation on TM lower? (https://airsoftcanada.com/showthread.php?t=40961)

yanhchan

July 7th, 2007 09:52

Kings Arms metal hop up installation on TM lower?

How exectly do I install the Kings Arms metal hop up onto a TM lower reicever I understand that I will have to dremel but I'm afraid of taking too much material off can someone take a picture of their modified lower so that I can see exectly how much material I need to cut off in order to fit the metal hop up?

ILLusion

July 7th, 2007 16:37

1 Attachment(s)

You just need to cut a square, where the stock hop up lower chamber screws in. Cut it to the front edge of the magwell.

yanhchan

July 7th, 2007 16:47

Quote:

Originally Posted by ILLusion (Post 498161)

You just need to cut a square, where the stock hop up lower chamber screws in. Cut it to the front edge of the magwell.

Thank you very much!!!! Dremel would do the trick yes?

ILLusion

July 7th, 2007 16:56

Quote:

Originally Posted by yanhchan (Post 498167)

Thank you very much!!!! Dremel would do the trick yes?

Yeah, I just used a cutting wheel and then finished off the edges with a file.

All times are GMT -4. The time now is 01:15.