Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   I cant decide!!!! (https://airsoftcanada.com/showthread.php?t=40619)

jrkiler June 28th, 2007 22:36

I cant decide!!!!
 
hey im new to this forum (and sorry if im posting in the wrong section), and i was wondering which mp5 a5 would be better t purchase, TM or CA. thnx for any type of response.

Desmodus June 28th, 2007 22:42

CA. Get age-verified before buying the gun and read some reviews man.

Capt. Tyco June 28th, 2007 22:52

Just a heads up your probably gonna get flamed. You should try using the search bar. This question has been answered countless times before.

ancorp June 28th, 2007 23:04

Get a Cyma springer.

Savage Haggis June 29th, 2007 04:49


philstructo June 29th, 2007 04:51

indeed they do rod & tod or who ever you are... flanders kids

Naerah June 29th, 2007 04:57

those two are sooooo brainwashed

TokyoSeven June 30th, 2007 00:34

creators shoulda killed those two off with Modd flanders as well.

grizz125 June 30th, 2007 10:48

get the CA
 
GET THE CA NOT THE TM OR THE CYMA, GET THE CA and Don't get a springer you will just wast your time. save your money and get a CA electric. trust me.

swatt13 June 30th, 2007 13:37

definatly ca, tm use to be top dog, but ca has surpassed them. you get a full metal body, a beefier mechbox, usually has metal bushing already, and shoots over 300 out of the box were as tm, plastic body, plastic bushings, shoots under 300, and depending on what modle you get you could get a v2 mechbox, which can only take so much upgradeing and abuse.

Richter June 30th, 2007 21:30

There are CA MP5s that don't have V2 boxes?

Saint_blackhand July 1st, 2007 22:51

Screw it if your going to get an mp5 whatever verison, I would go with the ICS. They shoot harder, have a slot to put a laser, and they are mostly metal.

Just remember tho, Mp5 is a small gun.

ThunderCactus July 1st, 2007 23:50

I'd personally go with a CA MP5A3 and replace the tappet plate, piston and spring guide, then your pretty well good to go :)


All times are GMT -4. The time now is 22:11.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.