Glock 18c Technical blunder
 

Anyways, had this pistol for about 3 years. Recently it started to get stuck on itself when the slide was forward and the weapon is "Cocked".

Ive disasembled and tried a whole bunch of solutions.

What Ive noticed is, the Inner barrel is going Downwards, and its kinda stuck on the outer barrel, hard to imagine visually i know.

I look down the barrel and you can see it slighly aimed downwards. If i stick a finger in there and push it 1cm up or so, itll slide back.

Ive cleaned the recoil rod, spring, insides ect. 1/4 times the slide will work flawlessly, but the others require alot of force, or the barrel move trick.

Anyways, Would buying a new Innerbarrel/OuterBarrel fix this? Or does this sound like a Recoil Spring issue, maybe not holding it in the correct position.

Thank you!

Whoreable

Edit, FIXED.

Added some Ducttape around the inner barrel,

wrapped it 3 "laps" around.

The barrel is now less movement, and it cocks flawless

It will also be more accurate like that. I used a larger o-ring in mine.

DD, what size O-ring did you use?