Airsoft Canada - M700/ M24

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)

- - M700/ M24 (https://airsoftcanada.com/showthread.php?t=36049)

are they the same internaly? Im looking for parts for my CA M24 SOCOM (version 2) to turn it into a beast for outdoor.

Some times it says i can use ASP-2 and some times is says M700 parts in the part description. Im just trying to get all my info strait befor i do anything.

If you have any experience with an upgraded M24 what parts did you use and what would you recomend.

Thanks
Jeremy

message CND_stalker, i believe he owns BOTH

Im more just confuzed about what model i can search for parts. It looks like some parts are interchangable and others are model specific. I know what parts i need i just want some info on brands, im mainly looking at Laylax and PDI but this is my first bolt action rebuild, done a few AEGs.

Thanks for the reference name tho

Ignore the M700, there are only two types really, both as gas powered.

And, as I got dragged into this (is ok, situation normal! Lol), here's a list I composed for a user on my Sniper's Range forum (Warmonger's website) last year. I've got everything in here, except my spring is a Laylax 150SP and I am using the PSS2 9mm spring guide. If you want under 450fps, then use what I listed below. Just remember, PSS2 is for the APS2 series (all adaptable except the cylinder for the CA M24) and when you order, anything listed as PSS10 is for the TM VSR, NOT compatible!

Quote:

Originally Posted by Stalker

Here's the manual for the CA M24 V2:

http://www.classicarmy.com/showcatal...?acid=111&pg=1

Upgrading to 450fps, I'd recommend these parts (you will need an upgraded cylinder for it, not sure if stock will work with these parts):

Guarder:

Ultra-light Piston for APS2

http://www.wgcshop.com/WGC_Shop/imag...ps2_03_low.jpg

Piston head for APS2

http://www.wgcshop.com/WGC_Shop/imag...ps2_02_low.jpg

7mm bearing spring guide for APS2

http://www.wgcshop.com/WGC_Shop/imag...s2_04a_low.jpg

Clear Hop Up & Bucking rubber

http://www.wgcshop.com/WGC_Shop/imag...ge0701_low.jpg

First Factory/Laylax:

PSS2 130SP Spring

http://www.wgcshop.com/WGC_Shop/imag..._130sp_low.jpg

Prometheus:

6.03mm 534mm tightbore barrel (needs to trim off about 19mm to make it fit right)

http://www.wgcshop.com/WGC_Shop/imag...barrel_low.jpg

All the above is what I have in my M24 (I have a different spring though, as well as the 9mm spring guide). That spring should give you about 425fps with 0.20g BBs, the tightbore will add another 10fps, and the bearing spring guide another 15fps, bringing you around 450fps.

And yet again we find stalker respoding to his name being mentioned via google search once every 6 hours

Quote:

Originally Posted by hattrick (Post 440000)

And yet again we find stalker respoding to his name being mentioned via google search once every 6 hours

LMFAO!! Good call. Am surprised google is leading to me, is kinda funny as well as ego inflationary.

Gonna have to get Kokanee to make one of these for me:

http://warmongers.dyndns.org/albums/.../greylocks.gif

sorry if this doesnt go in this thread but i just bought a CA m24 socom and its a springer,, is there a gas version?,, and i havent seen an m700 by classic army.

thanks, lykurgus.

You can buy a crappy (constant leaking, lots of maintainance for very little gain) CA gas cylinder to fit in the CA M24, but you are by FAR better off staying with the spring set up.

sounds good, i didnt know that gas converion had a leeking problem!
Thanks for the heads up.

Im planning on doing the silencer adapter so i can get an even longer barrel in it. I love project guns!

Just don't go too much longer, am not sure the internal volume of the cylinder, and too long of a barrel will cause a slight vacuum behind the BB.

Stock length is 515mm, plenty long. Not sure how you will sort out fitting the supressor to the end of the barrel, but am sure you have some ideas.

Any more questions feel free to ask me.