G&P delta Ring instalation
 

Hi Guys.



Bought a ras II and the appropriate G&P delta Ring.


I am installing it on a Gaurder metal body



Cannot Figure out how to install the thing any pointers at all?


checked the forum already not much help there.


thanks

Screw it on hand tight, then using a flat head screw driver you tap it tight. Place driver in between one of the spokes and tap it with the handle of another driver or very gently with a hammer. Remember you are just turning this D-ring tight not trying to sheer off the teeth.


You should also have a mock up "gas" tube. This is suppsed to slide through the D-ring with the hole that is on the sleeve at the top position. This "tube" slides through and into the upper reciever as well as into the triangle sight at the front. Its purpose is to lock the grips from turning on you.