how to conceal big batts.
 

if an M4a1 or clocks at 480-500++FPS and needs bigger or more batteries, how are these batteries concealed without using a pouch or a fixed stock?

PEQ? Readimag?

We're not likely to have solutions for a gun that would be illegal to own here.

full stock, crane stock.
some of those crane stocks take 9.6v 3800mah atteries and higher.

Springs that heavy can be cranked with standard batteries as well. Just put in the proper gear/motor upgrades.

Thanx for your help. Why even bother posting? I forgot its all about the post count.


A good butt stock (G&P or similiar)can hold most large Batteries. Some carving and a stock Marui one will hold a larger one as well.

Enough with that already.

You mean carving a full stock?

He asked for anything but a full stock. Why even bother posting? I forgot, it really IS all about the post count...

some new model G&P guns ships with the battery crane stock
http://www.wgcshop.com/WGC_Shop/images/gp_acc_416b.jpg

He asked for anything but a full stock. Why even bother posting? I forgot, it really IS all about the post count...[/QUOTE]

Dude, I have 26 posts. You have over 2000. Granted, I should have read the post more carefully.

are you waiting for someone to tell you to STFU? because if you are, just ask.
Im sure plenty of people would offer.

Dude, I have 26 posts. You have over 2000. Granted, I should have read the post more carefully.[/QUOTE]


Then just relax...You've already shown that you're one who believes the whole "You are not your post count" thing, so ignore what people post.

Keep in mind I have over 2000 over the span of just about 4 years, not TOO bad. Sure there's alotta people with under 100 that have been here just as long or longer then me, but meh, but there's also a ton of people who have been here a lot shorter than me with a LOT more posts then me.

The new G&P batteries are a 9.6v or 10.8v 2200mah Nimh instead of the shown 1700mah Nicad. It will crank my gun with standard ratio gears and an MS110 spring with ease.

If you use a good torque-up gear set, you should get some life out of a battery that size at 450 FPS. My G&P SPR would get around 1000 rounds at 450+ with a 9.6v 2100mah Nicad. Not enough for a full day, but 2 would be.

Another thing as well. The G&P crane stock is significantly smaller than ones that hold large sub-c battery packs. It's fit is better and they solve many of the potential wire problems associated with other designs as there is almost no exposed wiring and the entire battery moves as one unit with the stock.

Good design in my opinion.

http://www.wgcshop.com/pcart/shopper...srch_satellite

Satellite Battery Sling via WGC. Also in OD, but currently out of stock in that color.