M4 and Glock upgrade/accessory
 

Hey, I just wanted to make sure I can... I plan on puting the 6.04 barrel that comes with the G&P M4 into the KSC Glock 19....(And cut it down of course)

I plan to put a longer inner barrel thru the M4's silencer.

Second question. I couldn't find by searching, so in the full-stock that comes with the G&P M4, what is the absolute highest MAh, 9.6V battery I can fit in it?

-Inner barrel on AEG's does not fit a GBB.
-M16/AUG lenght inner barrel should be fine on your M4 if you are using a silencer as a shroud.
-The highest that I know is 3300mah and I believe there is higher than that.

But the highest MHh will fit that stock?

G&P Socom Silencer 195mm + M4 Inner @ 363mm = 558mm. That's not so long it's excessive is it? I want to make it come right up to the end of the silencer to be snugged up there.

I guess if I replace the M4 inner barrel with a longer one I'll have nothing to do with it then. Maybe I'll keep it in case I do get a P90 later.

-On full a stock you can fit a large battery. 2400mah is commonly used.
-M16/AUG inner barrel is 509mm. Standard lenght
-Your second option is 550mm. Extended M16/AUG lenght inner barrel.

OK, thanks.

Modding the stock to fit a 3300mA can't be too hard to do yourself.

I just got a M83 from Doubleeagle (M4) and it has a AAx6 7.2v 500mAh battery. Can I change the battery. All your help is greatly appreciated.

Start by changing the gun... Otherwise, stick to the current voltage, else you might burn something

Batteries with 3700mAh are now available and the same size as the 3300mAh ones. Heck, am sure you can get 4000mAh now too.

The 550mm inner barrel sticks out a tiny bit on the G&P M4 Commando's just a tiny bit.

On the regular G&P M4 it should fit just fine.

Here's a picture so you can get an idea of how the sizes compare.

G&P M4 Commando w/ G&P Socom Silencer & 550mm 6.03mm Tightbore Inner Barrel.

http://img.photobucket.com/albums/v7...355resized.jpg

Hope that helps.