how to disassemble the frame of VFC/Stark Arms Glock?
 

I've got the hammer assembly out, but the trigger pin is the problem. I used the same mount of force for the other two pins and they came out relatively quickly, so I just don't want to force anything for the trigger pin.

http://glockparts.com/uiimages/10010/triggerpinrem.JPG

if they're like TM Glocks the pin should be knurled on one end. try the other direction?

my buddy has the same gun. that pin, yeah its fake it doesnt actually do anything.

Make sure all screws are removed from the inside of the frame

I was able to strip the pin when I was watching a detail strip of a real steel glock. the pin does have a function, just like the real glock. basically I had to wiggle the slide catch up and down and the pin came out easy. but without wiggling the catch and hammering it won't do it any good.