Vsr-10 R-HOP advice
 

Hey guys,

Have a vsr-10 I R hopped with stock tm unit.

The first 2 week ends I used it, it was amazing! I felt like if i had Atleast 2 seconds to aim I couldn't miss.

This past week end however I was getting so many left and right curves I went home early. I think the stock arm may have finally given in to the classic instability the stock unit is known for so I'm considering the AA unit as I don't want to do a TDC mod.

I guess what my question is which nub I should be using with the AA unit for a R-HOP. I know normally it just a flat nub or a eraser but Ive seen the little H-Nubs floating around which would center the bb better with the R hop.

Right now I'm looking at these as options.

https://triggerairsoft.com/shop/ELEMENT-H-HOPUP.html

OR

https://triggerairsoft.com/shop/Mapl...Up-Rubber.html

I'm leaning towards the maple leaf.

If you have better suggestions please send links!

It honestly really doesn't matter, so just go with a flat nub, eraser or whatever.
The maple leaf thing is way too short.
And the element thing is absolutely nowhere near even being close to being long enough (it's for a very thin membrane like a flat hop to contour a BB, won't work the same way with a thick Rhop)
But the AA chamber seems to be the best option right now.

Plot twist I found a friend who would help me do the TDC

What's the best option? TDC or AA?

TDC on the AA chamber lol

I ended up with the AA chamber, shaved the fangs and used an eraser. Shoots amazing ��