Help me! feeding problem.
 

All right, one month and a half ago I upgraded my gun.
When I was upgrading my rifle, I broke my plastic hop up. Si I bought a prowin one.

BUT, I have so much feeding problem with the prowin, and when it shoot, I have around 150fps. I tried r-hop, flat hop, a lot of bucking, nothing work.

So I tried to glue my stock hop up, but it's worse.

What can I do?

VFC VR16, part list
:Lonex Aluminum Cylinder Head for Ver. 2
Lonex Cylinder Type 1
Lonex Extreme Toughness Piston (10-Teeth - Burgundy)
Lonex POM Ventilated Piston Head
Lonex M4/M16 POM Air Seal Nozzle
ASC™ V2/V3 Sorbo Buddy - 3/16" - 70 Hardness
Lonex M110SP non-linear spring
Lonex Enhanced Super Gear Set - High Speed Ratio (16:1)
Gate MERF 3.2
Tienly GT-45000 Ultra Performance Long Motor
Lonex Improved Hop-Up Bucking & Sleeve (50D)
HS5 Armory IR-Hop Z-Kit (ZKIT)
HS5 Armory M-Nubs (M-NUB)
HS5 R-hop ZKit Installation Tool
Pro-Win M4 Hop Up Unit
Hop-Up Unit O-Rings
Prometheus 363mm barrel
Lonex Teflon Cylinder Grease
Lonex Teflon Gear Grease

^ what he said.


The answer doesn't change if you start a new thread.

OR DOES IT?!?!?!?!?!?!?

http://25.media.tumblr.com/tumblr_lk...r7tyo1_250.gif

I have several stock VFC hop-up units if you get desperate.

Ohhh, I totally forgot about my last thread.

I'm not sure about plastic hop up.

this is not chinese card gambling. lol

Are you sure about a metal one?

All right, lonex hop up ordered.

side question: where can I find a cleaning rod?
.22 cal is correct?

I received the hop up yesterday.
Yeah!! Feeding problem resolve.

You don't need a gun cleaning rod. One (an airsoft one) should have came with your gun but if not most folks have a bunch I'm sure someone can give you one for the cost of shipping

the plastic ones are shit and break pretty easily... you can just go to walmart or canadian tire and get one for a .22

I buy a freaking VLC and for the price I didnt receive a cleaning rod -___-

Perfect, i'll buy a cleaning rod .22cal

arggggghh, little problem.

245FPS with 0.28g, need moar fps, arround 400fps with 0.20g can be perfect.
Can it be the Lonex Cylinder Type 1 or the lonez nozzle? all my compression parts are from lonex (excepts the piston for now).

Do a compression test with the nozzle all the way forward. Ive seen consistent 80 fps leaks from a bad nozzle fit before