LCT AKS74U 14mm to 24mm adaptor
 

Hey all,

I want to mount a PBS1 silencer to my LCT AKS74U, but not sure if I can take off the adaptor on the LCT to mount the Madbull PBS1 silencer.

Is it normally tough to take off?

Thanks,

Mausturm

In short, the LCT AK74U and the AKMSU sight block is the same part - and it is integral with the muzzle casting, that forms the 24mm threading, which slips over the outer barrel. You need to either replace the sight/muzzle threading assembly with a compatible 14mm replacement assembly, Get a PBS-4 that is 24mm threaded, or adapt the PBS-4 suppressor to fit the 24mm threading.

The Hephaestus 24mm to 14mm adapter is meant for the GHK AK74U series, which is an LCT body. I initially used this as an interim solution for a tracer unit using 14mm threads on my AKMSU, but i found it aesthetically unpleasing when i wanted to use a PBS-1 that had a 14mm thread.

See the following thread (pun intended), on the topic.

http://www.airsoftcanada.com/showthread.php?t=170902


My AABB(?) PBS-1 14mm to 24mm machined mod, eliminating the Hephaestus 24mm to 14mm adapter entirely. I have yet to test, but am working on a solution/mod for the interior bouncing BB issue, as was reported by a similarly equipped AK user.