TM Hi-Cappa eats sand and does nothing
 

Ok Gents.
My Side-arm had the luck to eat a lot of sand during a trainings skirm.
Wel i cleanded it and its still not working.
What is need is the manual, i cant find mine between my books so i am calling in your help.
Who has the manual of the TM Hi-Cappa 5.1, i used google didnt give me the right result.

Greets -Cy

How did you clean it? The best way ,without diassembling the entire thing, is to rince it with very hot water for awhile then you use a duster can ( new if possible to get the maximum pressure) to dry the internals, then lube everything and put the gun back together.

I disassembled the gun to 3 pieces.
Ok so i need to disassemble the complete gun, i can do that if i had the manual.
I cant seem to find mine and was hoping if somebody could make a Word-file with the manual or give me a linkt of the manual.
I know that CA has a manual site of there guns, does TM have something like that??
Thanks already

-Cy

:neutral:

Thanks, Wel the 3 parts were the basic parts 3 screws that it.
Any id how long it takes too dry the parts.

-Cy

What not wrong in the gun I done mine before took me 2 days to finally fix it. Their a bit of a trick installing some parts.

Hello Gents, after some research on i-net i have come to this conclusion.

For cleaning my Hi-Cappa i should use hot water and not disassemble the hole GBB.
Let the thing dry and lube it again.

Question, what about my spring in the slide, remove it and keep it appart??

Thanks - Cy

I dont know how its made but if its the typical gbb just remove the spring from the slide and rince thourougly with hot water, to dry use a can of fellow duster, let it dry a day or 2, depending on the state of the gun and lube everything

Ok thanks a lot SEAL.

When i cleaned my GBB i wil post again.

Thanks people.

-Cy

I noticed that it IS tricky! I currently need help putting my hi-capa back together. It seems to be something with the leaf spring. I'm not quite sure exactly how to reinstall it. If anyone has dealt with this issue before and could help me I would much appreciate it!

Thank you,
Angel.

for the love of fuck. stop resurecting old threads this is becoming a fucking joke

Find a local expert. It should take you less time than resurrecting a thread from last year on a forum in Another Country...