Airsoft Canada - ICS m4 and V2!

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)

- - ICS m4 and V2! (https://airsoftcanada.com/showthread.php?t=169846)

pazdee

January 21st, 2015 15:09

ICS m4 and V2!

Hey,I own an ics m4 and I know that they use split gearbox and that it's proprietary, but do any of you know if there is a way to get an v2 gearbox to fit in an ICS m4 (I want to convert it to an HPA) also, is it possible to change the outerbarrel to be able to use a conventional hop-up that would still fit this whole build?

Thanks a lot! =)

Styrak

January 21st, 2015 17:07

Quote:

do any of you know if there is a way to get an v2 gearbox to fit in an ICS m4

Nope.

If you want to do a Polarstar/HPA build, get a different gun.

pestobanana

January 21st, 2015 18:05

Quote:

Originally Posted by Styrak (Post 1929877)

Nope.

If you want to do a Polarstar/HPA build, get a different gun.

Aren't the new gen HPA setups supposed to be the size and shape of a cylinder assembly? I'm no HPA expert, I don't like HPA setups.

lurkingknight

January 21st, 2015 18:09

might be able to stuff an SMP into the gun... but it might be a hassle, given that the plumbing has to be run out the bottom of the gearbox, so the way the split gearbox comes apart might fuck around with it all.

pazdee

January 22nd, 2015 16:24

ok thanks for the info!

All times are GMT -4. The time now is 17:07.