Guarder C7A2 metal body
 

Does Guarder still make these or are they in a limited quantity now?
also does any one know where to order one if possible

Thanks!

No they don't . If I remember correctly, the serial number wasn't in the correct format for a Canadian issued rifle anyway.
Your best bet if you want a C7A2 is to get a blank receiver and have it engraved.
BTW, Imperial Engravers do great work:)
A receiver with laser etched trademarks would also work for engraving, but you'd need the surface media blasted to get rid of the original etching. That's what I had done with a G&G receiver, and I'm very pleased with the results .
http://www.airsoftcanada.com/picture...pictureid=4719

would they engrave the fire selectors as well from Safe-Semi-Auto to S-R-Auto as well as the filled in A2?
Also which receiver do you recommend as i would like to incorporate the ambi selector switch

G&g makes a c7 now

G&G makes something marketed as a C7 now. If you're super picky, the G&G model is way too far off to be called a C7