Airsoft Canada - Modify Modular High Speed Gearset Bracket Disassembly Help

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)

- - Modify Modular High Speed Gearset Bracket Disassembly Help (https://airsoftcanada.com/showthread.php?t=163539)

Jamroxorz

March 26th, 2014 16:13

Modify Modular High Speed Gearset Bracket Disassembly Help

1 Attachment(s)

I bought a Modify Drop-in gearbox, and just recently, my motor ripped my Bevel gear apart.
So I bought a new Bevel gear and want to replace it. Can anyone tell me how to take the Modify Gearset Bracket Version 1 apart? I have included a picture. Thanks.

MADDOG

March 26th, 2014 16:16

Quote:

Originally Posted by Jamroxorz (Post 1878819)

You need a special tool that fits over the nut holding in the bearing

http://www.airsoftparts.ca/store2/in...oducts_id=1223

Jamroxorz

March 26th, 2014 16:19

I actually bought that, it doesn't work, That's only for the Version 2.

Stealth

March 26th, 2014 16:25

I recommend a completely new gearset.
Why? Presumably because your pinion to bevel mesh didn't work well and this particular gearset doesn't allow you to shim correctly (actually it doesn't allow you to shim AT ALL) This means what happened is going to happen again.

MADDOG

March 26th, 2014 16:29

Quote:

Originally Posted by Jamroxorz (Post 1878825)

I actually bought that, it doesn't work, That's only for the Version 2.

Edit: Your version does not seem to be the self adjusting type I have seen in the past that had user replaceable gears, I would go with Stealth on this one, new set all around

Jamroxorz

March 26th, 2014 16:39

Looks like that'll be what I'll be doing. Thanks guys.

All times are GMT -4. The time now is 18:50.