Daytona Gun System
 

As many of you know these kits are all made by one extremely talented individual, and after the " OpForce " incident said individual has ceased production of the product for a few years. As of right now he only makes these kits upon request from individuals he trusts so that he does not get burnt again

I've picked up an interest in this system late last year, I needed a reliable GBBR, One that would not fail on me as easily as your standard WE, WA , KJW. I've spent LITERALLY thousands upgrading on my GBBR collection, and at the end of the day, I still get one problem their magazines really sucked.

In the Daytona gun system, air is fed through the air release valve and the supply is a nice tank of either CO2 or HPA, the cool down effect is so minuscule and shot to shot consistency is much better than your regular internal air gbbr system. Although the gun may seem complicated it is actually very very simplistic the internals are very straight forward and maintenance wise? Literally none, other than the occasional drop of " Airsoft Innovations " GBB silicon oil.

I have however ran into 2 problems with the system however, 1, without a decent recoil line, your gun will not function, I literally jerryrigged a recoil line using nothing but 6mm Teflon line and hose barbs, it will work, however not flawlessly. 2 problem is the feel of the trigger, the trigger does not reset, or have a "wall" it simply a button, you press it air comes out, it is a very stiff pull but it doesn't feel like a normal trigger system. Duribility wise I'd have to give his thing a solid 10/10, my current DGM4 is a second hand M4, I used it at OP:OP, OP: Triglav, It has been whitby atleast 5 times, its been to OP: DragonFly when I lent it out to my buddy Jeff, I also recently gamed it at LT's Battle of Weston RD, Not once have I opened it and cleaned the rifle, not once have I needed to repair anything on it, this gun was fully submerged in the muddy waters TWICE at Triglav as well, its been lent to new player, its been abused by holding it on full auto for minutes, this gun DOES NOT BREAK DOWN.


Heres a crappy video in my messy garage.
M4 with Daytona kit, never stop! - YouTube

Heres a video of my friend messing arround with another custom build ( dont mind the compressor kicking in, I used a compressor at home because I'm too cheap to always refill )
LCT AK with Daytona kit, never stop GBB lol - YouTube




As of right now there are 9 kits designed. 6 of which are still available and are marked with a *
M4 *
FAL *
G36 *
AK *
PDW
SR25
L85
M249 *
MP5 *
SCAR ( WE GBBR BODY )*



guide to air setups
http://www.airsoftcanada.com/showthread.php?t=162997

Post Reserved.

My Builds will be posted here

Yay I'm famous on youtube. I'll upload a video of mine later.

Dat tie tho....

I fondled said gun... it instilled giggles on the top side and movement on the bottom side. :P

I want an OSW DG now.

For the FAL, is that for the CA, King Arms or Ares series of FAL's?

Ca fal or clones only, the king arms sizing is way off on the insides, the clones will work but the fal kicks really hard so a quality is key ;)

:( Bah !

Looking forward to more builds. Always had an interest in this system, just not available for anything I'd really use often.

If by some chance he starts doing MP40's or STG's... I'll be all over that!

The best platform for HPA would be a support gunner.

The fal is about as oldschool as they get unfortunately: (

Damn. Why no SR25 anymore...

Well, Ares SR25 Bodies are harder to find than the MGC P7, and since no other company makes a SR25 where the Buffertube can house an actual buffer the kit has been discontinued. They can still be made upon request however he will not me making them for the public anymore

What brand of G36 best?

I would say Ares AEG body would be the best.

Daytonagun won't fit in Ares body. It's based of Marui dimension. CA would probably be best bet