Brass VSR cylinder kit ID?
 

Hey guys,

I recently picked up a broken VSR to work on as a side project. When picking it up the owner handed my a ziplock bag with a few spare parts including the original cylinder kit. After checking out the installed kit installed it seems to be made of decently high quality. The cylinder, nozzle and spring guide shaft are brass with a steel(?) piston and spring guide base.

It's been several years since I've tuned a VSR and was hoping somebody could give me an idea of what I'm looking at. I'll try and get some shots up in the next bit.

Cheers

http://i24.photobucket.com/albums/c2...psb8c206e2.jpg

marui stock parts are white nylon piston and spring guide, brass cylinder head and I assume steel or brass plated cylinder
Sears and spring guide locking pin would be grey pot metal
If it's a G-spec, the marui would also have an air brake on the piston

Sorry, maybe I didn't specify properly. There are two cylinder sets, the stock one and the upgraded mystery one. Also when I said the parts were brass I ment unplatted brass. As far as I can tell edgi is the only bare brass cylinder out there?

Photo up, any ideas?

Looks like edgi to me.

Alright, after further investigation my mystery clone appears to be an AGM MP001 with an Edgi cylinder kit and barrel.

The edgi parts are great but I can't believe how terrible the AGM hop chamber is..

That pistons end looks like the Laylax one. Check to see if you have a Zero Trigger installed also. That would be decent.

Sent from my SGH-I747M using Tapatalk