Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Media (https://airsoftcanada.com/forumdisplay.php?f=30)
-   -   G&P M4 Commando (https://airsoftcanada.com/showthread.php?t=15782)

Prowler September 3rd, 2005 02:27

G&P M4 Commando
 
Here is a view at my current finished project...

http://clanumc.org/prowler/commando_complete_s.jpg
(sorry if the picture is dark, my monitor is fuxed)

.:External:.
G&P M4 Commando
G&P OPS Suppressor
G&P Aimpoint
Guarder Handle Rail Mount
Guarder Recoil Pad for M4
x3 TM Lowcap Magazines

.:Replaced Internals:.
Prometheus EG 6.03 550mm Barrel
SystemA Metal Hopup
Guarder Air nozzle
SystemA Type-0 Cylinder

.:extras:.
Bushmaster 6-24x50 Illuminated Scope
King Arms Auto-winding M16 3000 round C-mag

Gun shoots around 345-360 fps (have not crono'd it since upgrading). Can hit a 3inch target at over 50 feet. Will update after fully testing the performance.

I also have my KSC USP Compact with full metal slide and barrel shooting propane. Yet to be cronographed (shoots super straight even with a broken hopup) :)

Yes I know the barrel is sticking out an inch from the suppressor on my m4, I intend to fix that later on.

My next project shall be my TM OD M14 to M21 sniper conversion, coming hopefully in the next few weeks :D

R.A.T.M._JLD September 3rd, 2005 03:20

Nice job dude. Can't wait to see that M14 conversion.

Obelisk September 3rd, 2005 03:52

Looking good mate. Can't wait to see it on the fields. :grin:

MinusII September 3rd, 2005 13:35

that is one sexy looking m4, Nice job.

G_unit September 3rd, 2005 15:44

I wish I could get a silencer on mine, I think they must of glued the shit out of the flashhider or something. How did you get yours off by chance?

JoeyJackhammer September 3rd, 2005 19:15

did you remove the small hex screw from the underside of the flashhider?

Prowler September 3rd, 2005 21:33

no, it was glued on however, i used a monkey wrench and ALOT of patience to get the thing off. dont forget its a 14 possitive threading.

Also I put my cmag through the ultimate test and played todays game with OpFor. HOLY...SHIT. 5000 rounds later I was surprised my battery was still at full strength.

I like the sniper configuration alot better though with my vietnam hi cap mag. The range on my gun is insane. I couldn't see the point at which my bb's where starting to fall.

<-- one happy airsofter

I feel so bad for all those new people I mowed down ;)

BC_K September 3rd, 2005 21:38

Heh, Very nice work hunny, I might just be tempted to work my magic on ya & have a go with the Commando. :wink:

Prowler September 3rd, 2005 21:48

when my m14 comes you better damn well use it. Not any of that "ew its armalite, get it away from me!" :P

G_unit September 3rd, 2005 21:59

Quote:

Originally Posted by Prowler
no, it was glued on however, i used a monkey wrench and ALOT of patience to get the thing off. dont forget its a 14 possitive threading.

Also I put my cmag through the ultimate test and played todays game with OpFor. HOLY...SHIT. 5000 rounds later I was surprised my battery was still at full strength.

I like the sniper configuration alot better though with my vietnam hi cap mag. The range on my gun is insane. I couldn't see the point at which my bb's where starting to fall.

<-- one happy airsofter

I feel so bad for all those new people I mowed down ;)


I figured it was glued on thanks prowler.

damage September 4th, 2005 00:04

I got chased by this M4 early today. Didn't know you had a problem with your silencer. wanna trade your inner barrel to mine :roll: I have a systema tight bore 509mm that will just fit right on your silencers opening. anyways nice M4 :wink:

Prowler September 4th, 2005 03:58

It wouldn't be much of a trade. :P

And thanks for all the comments

Prowler September 4th, 2005 20:57

2 Attachment(s)
another pic :tup:

Prowler September 18th, 2005 19:12

2 Attachment(s)
OMG! *hides from you*

Osss-10 September 18th, 2005 19:27

Omg it's Swamp Thing!

He's got a nice gun though ;)

I think armalites look best with just silencer and scope, and maybe a laser if it's your thing. Yours is great... especially since it's solid inside too. Sounds like a successful project; inspiring too...


All times are GMT -4. The time now is 06:41.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.