Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   G36 mag pouches (https://airsoftcanada.com/showthread.php?t=140200)

Brennen.B May 7th, 2012 09:45

G36 mag pouches
 
Hey, would i be able to hold two G36 mags in a triple M4/M16 pouch?

slink182 May 7th, 2012 09:54

Yes.

Only issue is that pulling them out can be a bit of a hassle with the edges/knobs of the mags catching on the pouch trim, or trapped by the retainment bungies. Makes mag swaps a nightmare when under fire.

I switched over to dedicated G36 pouches for that reason.

skalnok May 7th, 2012 13:04

Mind if i ask where you found the dedicated g36 mag pouches?

slink182 May 7th, 2012 13:12

ehobby, Tactical Tailors. Very few G36 pouch makers unless you hit tactical equipment stores in Deutchland. Even fewer if you're looking for pouches in OD or coyote (lots of flecktarn, though).

DSTactical in BC carries TT, but they couldn't fill my order completely (hence ehobby).

kalnaren May 7th, 2012 17:27

If you're going with two G36 mags, get dedicated pouches. Make sure they have malace clips. Many just have snaps that easily come undone when you catch the mag on the pouch pulling it out. I went this route for a while but eventually switched to double M16 pouches with one mag per pouch. 10000x better. Pouches are big enough that the mags slide in and out without issue.

slink182 May 7th, 2012 18:32

I tried fitting single G36 mags into double M4 pouches, but found that I had to cut the restraining elastics to even get them to move in/out without too much resistance. Mainly out, though, especially under stress.

I also tried double G36 mags (clipped together) in a triple M4, and that was an even bigger pain to pull out.

A dedicated double G36 mag box pouch, although specialized, is ideal - they slip in/out with silky speed. AND they can hold 3 M4 mags if you decide to swap your loadout.

kalnaren May 8th, 2012 06:49

I use TT mag pouches. I store the mags in the pouches so they keep shape. Works like a charm.

Short Round May 8th, 2012 09:09

For this exact problem, this is why I'm considering the PMags for G36s if I end up with a G36 platform

lurkingknight May 8th, 2012 10:11

that's exactly what I'll be doing if I can fix and unload one of my p90s

kalnaren May 8th, 2012 13:28

Quote:

Originally Posted by Najohn (Post 1650709)
For this exact problem, this is why I'm considering the PMags for G36s if I end up with a G36 platform

Will 100% be switching to pmags.

McCrea May 8th, 2012 13:30

There you go, they got Tasmania Tiger and they are located in Quebec.

http://www.surpluspontrouge.com/en/b...smanian-tiger/

slink182 May 8th, 2012 14:04

As much as I would love to switch to G36 PMAGs, nobody (that I know of) makes them for WE. :(


All times are GMT -4. The time now is 14:17.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.