Surefire MB556K
 

Anyone know if there is an Airsoft version?

http://stores.homestead.com/Laruetac...g/P7249823.JPG

There is a member with such a flash hider:
http://www.airsoftcanada.com/showthread.php?t=135616


Also madbull make a similar looking (not 100% the same) flash hider:
http://www.redwolfairsoft.com/redwol...lash_Hider.htm

Perfect...just what I was after.
Cheers

http://www.rhinoairsoft.com/details....56K-CCW&cat=17

There's a (+) threaded one on there, too.

Dytac makes one as well...

http://www.pbase.com/racingmaniac/im...8/original.jpg

None so far though supports a QD suppressor in AS version....

Now If I could just get the damn one off my WE m4 so I could figure out if it was CW or CCW I would know which one to get. I think it's welded on for christ sake.

The stock barrels on my version 4 (open bolt) WE M4s (both the M4A1 and CQBR) are both CCW.


&& the one on my M4A1 (recently acquired) was sorta gummed on. I used my armorer's wrench to get it off. There was something that reminded me dried syrup gumming up the threads. Brake cleaner made quick work of it (watch out for the paint).

I believe the older models are CW. Mine is anyway.

EX, if this is one of Brian's M4's, I have Blue Loctite on all of the threads for that training contract. Heat it with a jet lighter/dip it in boiling water/hit it with a heat gun and then turn CCW to release.

EDIT: An armourer's wrench will help as that's what I put it on with.

Perfect thanks bud.

that did the trick..CW to put on CCW to release...