Magpul MOE Grip on a PDW.
 

Question : Can you install a Magpul PTS MOE grip on a PDW aeg? I noticed on mine that it has a short type motor and that the stock grip is alot shorter then the Magpul one. If i switch grip and put in a long type motor, would it work?

Thanks in advance for the responses.

It should work. im waiting for my parts to come in but i plan on using a regular m4 grip on my kac pdw and im going to use a long type motor. ive heard it works

Yes, this works. I swapped the stock motor out and put in a long type pretty soon after getting it. Also, I believe the stock motor is a "medium" type, not a short type. There are some compatibility issues with swapping in medium-type motor replacements in this gun (something to do with the width of the cylinder that wraps around the shaft interfering with the pinion hole, on Systema's medium motor I believe it was).

With long-type you are safe. I've tried a couple.

I have also tested the following grips (with long type motors):

- G&G M4 grip
- King arms M4 grip
- G&P M4 grip

The G&G one had the best fit so I stuck with it.

Extraordinaire on airsoftmechanics has a few videos on YouTube with a PDW that has a Magpul grip on it and seems to work and sound quite nice.

I'll give it a try later on tonight! Thx

My VFC KAC PDW came (used) with that pistol grip. Changed it to a G27 grip:)

A bit tight but it seems like it fits and its working. I'll have to wait till tomorrow to test with some BBs. Love the looks :) Also alot more comfortable since the grip is like a inch longer