magpul MOE handgaurd help
 

hey all, i just bought a moe handgaurd for my m4, but its a wee bit long. is there a way to move the front triangle forward?
anyone else have this issue?

punch the 2 pins at the bottom out, this will allow you to remove the triangle... but to put it at another location on your barrel, you'll need to dremel out 2 grooves at the correct location so that the pins can be reinstalled.....

If you can't dremel two additional pins, and yours has the hex screw to tighten (like the CA M15A4) you could drill a deeper hole for the hex screw and use a longer one to keep it in place.

or maybe if you have an ICS you just take an allen wrench and loosen a screw on the bottom of the sight\post

which gun do you use? magpul parts fit best for G&Ps and TMs. If none of the screw and wrench things work, you can always buy a G&P front post.

First, tell us which brand your gun is. We don't have much of an idea what's causing the problem...

Since when did Magpul handguards fit the TM delta ring?

never... read the other posts of the guy, a lot of misinformation.