Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   Help! Slide cant be pulled back! (https://airsoftcanada.com/showthread.php?t=124656)

iKliiu May 18th, 2011 21:07

Help! Slide cant be pulled back!
 
on my KJW 1911, the slide is stuck so that it I can't even pull it back enough to push the pin out to disassemble. I suspect it has something to do with the recoil spring being stuck, any suggestions? I have thought of creating a new notch for the pin to slide out, but that would acquire me to ruin the frame.

Thanks

Styrak May 18th, 2011 21:31

Remove the barrel bushing, take out the bushing, plug,and spring.

iKliiu May 18th, 2011 22:22

Any advice on taking out the plug? I cant seem to do so, but I have removed the barrel bushing and can now move the outer barrel. However, the slide still doesnt pull back all the way.

Amos May 18th, 2011 22:27

... You need to remove the slide to remove the plug.

Ballcancer May 18th, 2011 22:34

You need to wiggle the front recoil spring to reseat it from what it sounds like .. I had to do this to my ksc one when it was working.

iKliiu May 18th, 2011 23:14

Quote:

Originally Posted by Amos (Post 1468946)
... You need to remove the slide to remove the plug.

The thing is, I can barely budge the slide.

Styrak May 18th, 2011 23:25

Quote:

Originally Posted by Amos (Post 1468946)
... You need to remove the slide to remove the plug.

Oh yeah I forgot it only works like that with real steel.

iKliiu May 18th, 2011 23:37

Quote:

Originally Posted by Styrak (Post 1468989)
Oh yeah I forgot it only works like that with real steel.

Any other advice then?

Thanks

sushicake May 19th, 2011 00:18

Use a long screwdriver or a long allen key to push the spring plug in. And then manually rack the slide back.

iKliiu May 19th, 2011 07:41

Quote:

Originally Posted by sushicake (Post 1469017)
Use a long screwdriver or a long allen key to push the spring plug in. And then manually rack the slide back.

The spring plug gets stuck after I pushed it back a bit. It only moved about 1 inch.

Kos-Mos May 19th, 2011 14:47

Take out mag.
Remove everything you can without breaking it.
On a 1911 that means you can also remove the hammer spring and frame safety, along with the leaf spring.

Put gun in a large plastic container.
Pour hot water on it (as hot as you can have your hands in).
Wiggle the gun in the water for 5 minutes.
Try to rack the slide/move the controls.

The heat will make the slide expand, so if there is something stuck in the gun, it will let it loose.

Don't forget to completely disassemble the gun, dry everything and lube everything with silicon oil RIGHT AWAY. Otherwise everything will rust.

iKliiu May 19th, 2011 18:52

None of these seem to work, I afraid, so it looks like I'll have to make that notch.

Shirley May 19th, 2011 19:03

I'm guessing your disconnecter got stuck which locked up the slide?

If not, how does your slide even get stuck that way.. Just smash the front end back with the flat head and a hammer. :D

Thenooblord May 19th, 2011 19:17

slide may be jammed on the barrel lugs? try smacking the front of the barrel with your palm


All times are GMT -4. The time now is 12:00.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.