BOL DATA Battery Charger
 

so im about to buy from ehobby and i need to buy a smart charger,

now i dont know alot about smart chargers , just whanted to know if this charger would be good, for charging and 8.4v and 9.6v , and if some have experience with the charger, is it complicated ?


http://shop.ehobbyasia.com/bb-batter...y-charger.html

It should work. I had a basic BOL smart charger and it worked fine for a few months before it stopped working under normal use. I would never buy a BOL branded product again.

can some1 consider me a working charger under 45$ at ehobby , something thats just gonna do what its supose to and nothing more.?
 

can some1 consider me a working charger under 45$ at ehobby , something thats just gonna do what its supose to and nothing more.?

I got a Piranha Peak charger from eBay for 25$ shipped.

Check also for the Imax B6.

http://shop.ehobbyasia.com/bb-batter...e-charger.html It can charge lipos so you're set for the future. It's best to invest in a good charger now than risk destroying your batteries.

I have that charger, SO AMAZING!

Easy, but not from ehobby.

http://www.hobbyking.com/hobbyking/s...idProduct=5606

It is the big brother of that charger you posted, for cheaper and not a rebrand... straight from the original factory.

Looks like it doesn't have a slot for 2 cell lipos, which means you're SOL if you want to properly balance 7.4v batteries.

Nope, you can plug the 2 cells into any bank, or buy the adapter they are selling. The plugs are all connected to the same board, so when plugging a 3 cells, it's like plugging it in the 6 cells balancer plug but with the extra wires left unconnected.