PDI parts in a VSR-10 clone
 

Hey,

Hello people of ASC. I do need expert help with a certain issue of mine involving the TSD SD-700 clone that I own.

Unsurprisingly, it's broken.
The sears have worn down and my cylinder is scratched up + my spring is broken.

I would like to purchase some upgrades for my rifle. Will they fit?
1. reinforced V trigger system with piston end -$175-PDI
2. Bore up premier cylinder set-$200-PDI
3. 140 spring for vsr-10- $17-PDI

If i get the 140 spring, these internals will last a long time, correct?

Here is the links from airsoft GI, (will these get through customs?) I have successfully purchased from this site before.

http://www.airsoftgi.com/product_inf...oducts_id=6066

http://www.airsoftgi.com/product_inf...oducts_id=6663

http://www.airsoftgi.com/product_inf...oducts_id=6061

Help much appreciated,
Thegitfinger

The parts will fit but...

The bore-up cylinder set requires the bore-up v-trigger. You will also have to remove the two guide rings in your reciever for the bore-up cylinder to fit (no biggie).

You will need a 13mm spring with the PDI cylinder kits. I cannot tell from that link if that spring is 13mm or 11mm.

If you use a 500mm or less inner barrel, a regular bore cylinder kit will be fine. Any more than that and a bore-up kit is suggested.

The parts should last a long time with a 140 spring... or even more for that matter.

Ive imported a number of the kits, trigger and springs. Never an issue.

Dont forget about the clone hop up rubber which will be crap ^^

Firefly is the answer mon ami, hard type for 410+ FPS, soft type for 390- FPS

And PDI are the way to go, PDI upgrades are best upgrades. Which will take basic handy man skills to do it all, but it's doable.

Honestly, the amount of money you'll be spending would be roughly the equivalent of buying a stock TM VSR10

well, the gun is a TSD Sd700 if that helps. I am not sure of the stock measurements. Just out of curiosity, if I buy a new clone (much cheaper) and downgrade the stock spring (too hot), will it last longer even with stock parts?

Bump:)