X-charger error?!?!?
 

I have this X-Charger B606 and I'm trying to charge Lipo 11.1v 1300mAh now but it keep saying that "connection break" I read the FAQ and it means battery connection inturupted.

Anybody know what's the problem???

You can check the video of mine here;

YouTube - X Charger B6 Lipo problem "connection break"


Please help me out.~~~~~

this happens to me, every-so-often, with my B6D - it's basically the same as yours. I had to resolder the connection ends on my battery to fix it but until I did that, I plugged it in to the connector half way, this seemed to help. Give that a try, see what happens...

On mine (with a LiFE battery) I have to plug in both plugs to get it to cycle.

ok on your lipo battery you have 2 plugs.you need to plug the white plug into the side of your charger also.you will see various ports in the side of your charger for a 7.4 or a 11.1 lipo.so you need to connect both plugs from you battery.hense no connection break..
reaper.

Well at the end of the video didn't he plug the second one, and it kept reading connection break? I've got to learn how it works too, I've got the basic version of that charger, and a 7.4v lipo just acquired :)

My B6 will refuse to charge a LiFe battery unless both the power and balancer connectors are plugged in.

I've been told that some lipo chargers will charge over just the balancer connector.

I would say it's possibly a bad connection in one of the adapter ends or it's soldered backwards.

I just found out that the battery is defected..I've tested with other lipo and work find..;D

Oh sweet jesus it's gone over the russkies!


It could be a different issue, are both the chargable battery and "defected" battery the same make model and specs?

I've had a couple of defected batteries from Hotpower and G&P. Get higher quality lipos batteries from Madbull or Socom.