Airsoft Canada - G&P M4 CQB-R mag release

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)

- - G&P M4 CQB-R mag release (https://airsoftcanada.com/showthread.php?t=118112)

Hortons Heros

January 31st, 2011 18:18

G&P M4 CQB-R mag release

I am going to be working on a G&G M4 CQB-R MAX and I looked briefly at the mag release and I could not see an easy way to remove it. Anyone have any experience with this?

EDIT-dang it I pasted the wrong info. It's a G&G M4 CQB-R MAX.

BobbyDangerous

January 31st, 2011 20:42

Unscrew the screw on the release button thats it.. I don't see how it would be different then any other G&G... Maybe push the release button and grab the other side lever thingey and unscrew that? All i can think of.. Maybe there is a video on the G&G site.. Is it G&G or G&P?

KoRn	January 31st, 2011 21:09

LOL read the post its a G&P M4 CQB-R

BobbyDangerous

January 31st, 2011 21:13

Yeah but in the thread he says G&G

BobbyDangerous

January 31st, 2011 21:13

"dang it I pasted the wrong info. It's a G&G M4 CQB-R MAX"

Jabronie

R.I.T.Z

January 31st, 2011 21:13

Quote:

Originally Posted by KoRn (Post 1399711)

LOL read the post its a G&P M4 CQB-R

ummm did you read?

Quote:

Originally Posted by Hortons Heros (Post 1399554)

http://www.airsoftglobal.com/shop/im...G-CATCH-AG.jpg make sure that there is a philips head screw in the button, if there is just remove the screw and the mag catch should pop out no problems, make sure you dont lose any parts.

now if it doesnt have a little screw in the button
http://www.airsoftgi.com/images/pic-...-mag-catch.jpg
push the button all the way in as far as it will go, then use the other side and unscrew, make sure not to lose the spring

KoRn	January 31st, 2011 21:14

LOL

scurvythepirate

January 31st, 2011 21:15

If its a G&G, all you have to do are these steps.

Push in the magazine release ALL the way, possibly using your finger nails.

Hold the mag ralease catch (plastic piece on the other side) and turn it until the mag release falls out.

BobbyDangerous

January 31st, 2011 21:15

:P

I just use a tweaker or (Jewel Phillips head screwdriver) and unscrew it..

R.I.T.Z

January 31st, 2011 21:18

there are 2 types of mag catch that G&G uses (why i have no idea)

BobbyDangerous

January 31st, 2011 21:18

Quote:

Originally Posted by R.I.T.Z (Post 1399719)

ummm did you read?

http://www.airsoftglobal.com/shop/im...G-CATCH-AG.jpg make sure that there is a philips head screw in the button, if there is just remove the screw and the mag catch should pop out no problems, make sure you dont lose any parts.

now if it doesnt have a little screw in the button
http://www.airsoftgi.com/images/pic-...-mag-catch.jpg
push the button all the way in as far as it will go, then use the other side and unscrew, make sure not to lose the spring

This!!!

http://images.starpulse.com/Photos/P...Ninja-ps02.jpg

BobbyDangerous

January 31st, 2011 21:19

Quote:

Originally Posted by R.I.T.Z (Post 1399726)

there are 2 types of mag catch that G&G uses (why i have no idea)

'I have the M4 Commando.. Has the Screw.. Most likely he has the other which is why it prob seams difficult..

Hortons Heros

February 1st, 2011 00:10

what the heck happened to this thread...why is there a dead comedian here now?

The screw would have been the easy answer, I never would have figured out the push through and unsrew method. Thanks a million.

Quote:

Originally Posted by R.I.T.Z (Post 1399719)

now if it doesnt have a little screw in the button
http://www.airsoftgi.com/images/pic-...-mag-catch.jpg
push the button all the way in as far as it will go, then use the other side and unscrew, make sure not to lose the spring

BobbyDangerous

February 1st, 2011 10:01

Haha. I said that in my orig post I only posted that cause the pic of both was ninja making it easier to understand. Why I posted Farley in Beverly hills ninja lol

All times are GMT -4. The time now is 15:19.