I give up. (Battery Help)
 

So I have been looking for a while now and I am unable to find a battery for my G&G SCAR-L, It runs a 9.6 volt with a Deans connection. I will also need a smart charger for the battery, which I can not find either.

Any help?

Smart Charger that I use, it's pretty good
http://www.torontoairsoft.com/produc...id_product=201

I don't see a Deans connector in the picture, and it does not say it has it in the description.

Do it yourself (you don't seem to be able to do that) or get someone to put a deans connector on for you.

Yes, my knowledge on Charges and batterys is quite small.

Well, now that a Charger has been chosen, what would a good battery be?

An 8.4v or 9.6v in the highest mAh you can find that will fit in your gun,

Intellect, G&P, and Elite are very good battery brands.

why not use an 11.1v li-po, if your gearbox can take it. Or a 7.4v li-po so you'll have the ROF of an 8.4 regular battery while taking up much less space than the 8.4v regular would

Almost any battery store worth their space will be able to make a battery pack for you at comparable prices.

If you can handle a soldering Iron, then all you need to do is find a battery that has same dimensions as what you have now (or what you know will fit your gun). Then all you will need to do is change the connector to a Deans.

You can get Deans connectors from Hobby shops, they are commonly used in Model airplanes. If you are in a jam, PM me and I will send you one.

For a fantastic intelligent charger, get one of these:

http://www.hobbycity.com/hobbycity/s...idProduct=7028

It runs on 12 V power supply, (or connect it to your car battery)
or you can get a PS here:

http://www.hobbycity.com/hobbycity/s...idProduct=6256

This will charge, Nicad, NiMh, Lipo and LiFe and Pb, at whatever rate you want ti charged. It also displays what was put into the battery so that you can see how much charge it took. They also have the ability to discharge(cycle) your battery to condition them back to maximum efficiency.

I have 3 of them. I use them for my model airplanes but they are perfect for my AEG's as well. This is a fast and easy way to do it.

You could also just buy an adaptor of ehobby.

check out airsoftparts.ca
prices are good and customer service is excellent.

and its in canada