wired issue with my holosight (552 style)~~
 

i bought my ACM 552 style holosight, it works great but today when i turn it on, i found out that beside the glowing circle and the dot, there are two sets of them beside the one in the middle, right now it's one circle and a dot in the middle, two other circles and dots around it(but they are not as bright as the set in the middle), seems like a projection or reflection issue, any one know what happened? thanks

That sounds like what folks call "ghosting" and it's pretty common with clone EOTechs.

i c, thanks so there is no way to fix it?

Buy a real eotech?

It's at it's worst indoor, in low light, etc. When you're focused on the reticle instead of the target, it is less noticable.

The best of the copies is the Hurricane one, but for the price new you could find a deal on a used real one here.

If you use it on low light, you might want to adjust the light to lower levels, the ghosting will disapear a little bit. for outdoors, not much to do.

even real ones have this(though much less than clones), it happens with all sights that use lights to work.

the 552 I used for 6 months had zero ghosting, even with a cracked front lens.

One I've seen has it.