Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   Daniel Defence 7" installation (https://airsoftcanada.com/showthread.php?t=107804)

tehmedic July 20th, 2010 10:43

Daniel Defence 7" installation
 
hey everyone,

I wanna install this DD Omega rail

http://airsoftdepot.ca/catalog/produ...roducts_id=289

I have a JG M4-S system. It's got a fake delta ring and i asked huang he said that the DD rail has a delta ring that it comes with. i've also purchased a new TM upper.

so here's the question.
I was wondering if i needed to get new iron sights with a new gas tube. since the one that comes in my JG is useless; it's a lot shorter than other m4's, it doesnt even go into the gasblock. it stops at the front cap. Therefore my iron sight doesnt even have a hole in it for a gas tube.

Conker July 20th, 2010 10:49

You need a VLTOR type gas block, and a RIS front sight (usually the KAC goes better with the DD, but an MBUS or any other will fit).
http://airsoftdepot.ca/catalog/produ...roducts_id=476

EDIT: Forget what I said, that's for the Mk18 RIS II and not the Omega 7.0. I was wrong, my bad.

ex July 20th, 2010 10:57

I do believe the 7" Is a direct replacement is it not from the standard hand guards?

So you would need a standard M4 Triangle sight/gasblock

huang July 20th, 2010 11:09

Hey I will not recommnd this element DD rail even I sell them. I will recommnd the big dragon DD 9'' omega, much better quality. If u do want 7'' , get allwin DD 7'' which is out of stock now

for 9'' u better get a low profile gas block too which is useful to line up the outer barrel

for 7'' u can use the stock front sight, gas tube is optional

tehmedic July 20th, 2010 12:21

How come you don't rcommend the element DD? and how much does the allwin DD7" cost.

and my stock front sight is a flip up not the normal triangle sight.

and thanks for the replies guys :D

and if i need to install the gastube with it i was just thinking of getting huang's SPR flip up sight.

also i think i shouldve put this into the upgrade section -_- sorry...

northcop July 20th, 2010 14:26

I had a similar dilema not too long ago and ended up buying almost the same DD system for my G&G. I just removed my gas tube all together it's just there for looks anyway and you likely wont notice its gone with the new system. also if your battery sits in your foregrip your gonna want to get a battery box or rear wire and go with a crane stock as trying to get a battery in that thing with be a b**ch.

tehmedic July 20th, 2010 14:36

thanks :D i think i'll be getting this DD my next check. and yeah i just have a batt bag on my handguards for now. putting in batteries in my s-system was a bi*ch as well


All times are GMT -4. The time now is 01:43.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.