Using Gas Blowback Pistol
 

Hi all,

This might be just me but I bought a

KSC H&K USP P10 (SYSTEM 7) blowback gas pistol and it worked fine for a day.

Now, I pull the trigger and nothing happens.

There is gas in the magazine (I push the button on it and it releases it) but when I pull the trigger, there is no blowback or anything.

If I pull back the slide, all the gas is let loose in a second before the slide gets back into place.

Anything I might be doing wrong? This seems easy to use.

Thanks,

- MV

This is apparently a common problem in that particular gun, because a freind of mine had that exact problem. He ended up lubricating parts around the magazine, the valve inside the gun and etc and it started working just fine. Dont take my word for this, its just what's been found to be a remedy for this problem

Also, don't get in the habbit of pushing the button on the magazine. It's a good way to blow the seals.

just put a little pressure on them, if they don't move easily, there is gas. but don't actually release it.

Thanks for the tip, it worked and the gun is now working fine!