C7A2
 

So I have myself a G&G M16A3 but I want to make it an C7A2.

Now the main problem i am running into is how I can take my solid stock which houses my battery, and replace it with a collapsible stock.

so how do i go about doing this?
Where do I put the battery now once the stock is replaced?
What would be the most easygoing and cheapest way of doing it. Im not a gun tech.

Thanks for any info

do a search. The answers to all your questions lie in the depths of this wonderful place.

http://www.airsoftcanada.com/showthread.php?t=84825

1. Buy a buffer tube set & Stock.
2. Buffer Tube.

Use these combinations:
http://shop.ehobbyasia.com/king-arms...tock-pipe.html
http://shop.ehobbyasia.com/king-arms...tock-pipe.html

3. Pretty easy install. Tons of guides online (you dont have to open "up" your gun".

PS. Make sure you know that risks involved when using lithium batteries.

What are those risks?

http://tinyurl.com/3567892

EDIT: OR http://bit.ly/Mzb78

Another option is to use a Crane stock or other collapsible stock that hows a battery in a similar way. Theres always the mock PEQII units that also house batteries, or by using a battery bag attached to the standard LE style collapsible stock.

I got a collapsible stock but the issue is that wire runs under the tube and wont fit inside it. so I got this wire on the outside now and it looks lame

You want a lipo battery that fits inside the buffer tube.

Yeah the lipo would work but the issue is that the connection for the lipo is below the tube