How to Mount M4 Grip to CYMA EBR M14
 

Hi Everyone,

My son has been getting into airsoft a lot lately and wanted to pick up a "project" gun to fix it up and learn more about how they work. He bought a CYMA EBR M14 that needed a bit of work, and so far we've got it mostly fixed up.

It was missing the grip, however, which should be easy enough to fix, although we're actually scratching our heads a bit on this part. He picked up a new M4 grip for it, but we didn't realize the mounting bracket on the gun is completely missing as well. Either I don't know what to call it, or it's a hard to find part, because we can't seem to find anything to connect this grip (or any grip for that matter) to the gun. The screw holes all seem intact, though.

I figure it's going to look like something on this video 50 seconds in, but this gun doesn't house the motor in the grip: https://youtu.be/YsOIrECK_eE?t=50

Any thoughts here? Are we going to have to get a mounting bracket machined? Appreciate any help you can give, thanks.

Look like you just need a real M4 pistol grip & bolt for that since the motor isn't in the grip.

But there should be a wedge shaped stub to bolt it to on the stock assembly. If that's been broken or ground off the project got more expensive.

That's exactly the problem, the wedge shaped stub is missing. I don't know the reason it was removed, but it looks like it was done cleanly, so if I can just find that replacement part we should be in business.

It's either that or find another way to mount a grip to the stock.

Pictures.... pictures say more than your words can ever say.

Good idea, should have thought of it. Couple of pictures here:

https://i.imgur.com/sKZsthg.jpg
https://i.imgur.com/1x9yPPU.jpg

You just need a real M4 grip and bolt.

That's great, and thanks for the suggestion. We'll dig one up and try it out. I'll report back to let you know how we made out.

You're going to need that little wedge piece to properly mount the grip. Unfortunately I have no clue as to where you'd be able to find one.

As we've been looking at this more closely, I agree that we're going to need that wedge. Might see if I can get something machined... :(

This is the original part.

https://airsoft.tiger111hk.com/m60/C...duct_info.html