Airsoft Canada
Page 10 of 36 123456789 10 11121314151617181920 Last »
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   VFC (UMAREX) MP5 GBBR Owners Thread (https://airsoftcanada.com/showthread.php?t=136793)

badbin October 30th, 2013 15:53
Thank you

cookedham October 30th, 2013 16:06
Oh so u got your answer already lol

Bootrix2 October 31st, 2013 17:15
Would be nice to get the vfc mp5k here. Anyone have experience with it?

Tisane November 2nd, 2013 20:20
Quote:
Originally Posted by Bootrix2 (Post 1845712)
Would be nice to get the vfc mp5k here. Anyone have experience with it?
Cracking little gun mate, with the exception of VFCs woeful hop up I really can't fault it.

cookedham November 7th, 2013 20:39
I have asked different retailers in the local, nobody can get it in cause too low FPS, unless you pay shit load of $$$ for someone in asia and mod it to super high FPS and import it to you, but it will be very expensive, which not worth it, Mp5k are always in my wish list damn......


Quote:
Originally Posted by Bootrix2 (Post 1845712)
Would be nice to get the vfc mp5k here. Anyone have experience with it?

cookedham November 7th, 2013 20:41
be honest VFC GBBR are great guns, need to tune up before use

sound, look and kick are great!!! better than WE always...

Sequential November 8th, 2013 00:38
Quote:
Originally Posted by cookedham (Post 1847147)
be honest VFC GBBR are great guns, need to tune up before use

sound, look and kick are great!!! better than WE always...
+1...

Honestly this VFC MP5 is amazing after the upgrades.... The chassis is really damn strong and nicely made. The sound it makes on propane is unbelievable, along with the nice crisp blowback!

After a long fix of realizing how to optimize the guns performance, the original type 2 loading nozzle is the best for the gun.

With that nozzle I have never had ANY issues.

Tisane November 8th, 2013 21:40
Quote:
Originally Posted by cookedham (Post 1847146)
I have asked different retailers in the local, nobody can get it in cause too low FPS, unless you pay shit load of $$$ for someone in asia and mod it to super high FPS and import it to you, but it will be very expensive, which not worth it, Mp5k are always in my wish list damn......
Why would the mod for upping the FPS be so much money?

The mod itself is exactly the same principal that WE owners have been using for years and it takes all of 5mins to perform.

N_Force November 9th, 2013 16:06
Does it look weird?? LOL

http://i1285.photobucket.com/albums/...psa8acdf8b.jpg

Sequential November 9th, 2013 19:28
Quote:
Originally Posted by N_Force (Post 1847458)
dafaq.

spartan117 November 10th, 2013 05:30
http://i1082.photobucket.com/albums/...pse7490f9e.gif

cookedham November 11th, 2013 16:11
Quote:
Originally Posted by Tisane (Post 1847349)
Why would the mod for upping the FPS be so much money?

The mod itself is exactly the same principal that WE owners have been using for years and it takes all of 5mins to perform.
Coz VFC is not a WE system

MP5 is not even a WA m4 system, so have to pay the guy to mod it, wages is the cost for high price, then import price and Shit

Tisane November 11th, 2013 18:16
Quote:
Originally Posted by cookedham (Post 1847762)
Coz VFC is not a WE system

MP5 is not even a WA m4 system, so have to pay the guy to mod it, wages is the cost for high price, then import price and Shit
Different system yes, but the mod is exactly the same.

All your looking to do is make the floating valve sit further back in the nozzle, that is achieved in exactly the same way as you would for a WE open bolt gun, trim off the prongs that the floating valve sits on, drop it all back together and see what FPS your running, then you know how much more (if any) you have to trim to get the FPS your after.

I'd bet my MP5k that's all your paying to have done.

Simples :)

Gato November 11th, 2013 19:18
Quote:
Originally Posted by Tisane (Post 1847780)
Different system yes, but the mod is exactly the same.

All your looking to do is make the floating valve sit further back in the nozzle, that is achieved in exactly the same way as you would for a WE open bolt gun, trim off the prongs that the floating valve sits on, drop it all back together and see what FPS your running, then you know how much more (if any) you have to trim to get the FPS your after.

I'd bet my MP5k that's all your paying to have done.

Simples :)
Pretty much what I figure too. Seems to be a solution for many gas based guns, slight variations exist, but pretty much the same idea.

BioRage November 11th, 2013 19:20
Quote:
Originally Posted by n_force (Post 1847458)
ultimate cqb weaponnn


All times are GMT -4. The time now is 16:12.
Page 10 of 36 123456789 10 11121314151617181920 Last »
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.