M4/M16 Metal Body
 

i was just wondering if this body is compatible with G&G M4's M16's
http://www.airsoftgi.com/product_inf...oducts_id=5499

Don't worry about telling me not to order it from the states, because i'm not going too

Probably, yes. But I'd reccomend going with a higher quality metal body.

The body is to the externals as the Shell is to the mechbox. If you're body is fubared, your gun is totally fubared. (And I've seen hit and miss from clone companies)

Stick with companies like G&P, King Arms, Madbull, etc etc for such an important piece.

Keep in mind that if you buy a G&P body, you are limited to using G&P rails and front ends unless you start doing some serious work to the body, like re-threading the upper.

Nothing wrong with Echo 1 metal externals. They're not the best out there, but they're tougher than the plastic body on the G&G. So I don't see what the problem is. If one can get better, than it's always recommended. But IMO, there's nothign wrong with that body. Hell, my DBoys C8 body has seen a lot of action and taken some serious abuse and has no problems anywhere. As far as I'm concerned, Echo 1 make higher quality bodies than DBoys.

BTW, you never mentioned one way or another, but if it's one of the G&G Blowback models, standard bodies won't work. as the inside of the upper is slightly different to accomodate the modified V2 mechbox and the blowback mechanism. If it's a standard G&G, then yeah, it should fit fine.

Haha, it states the material is steel, I highly doubt that.

I highly doubt it's steel as well.

more like monkey metal... aka zinc alloy

i'm gonna ask airsoftgi if it's steel or not

If its an echo one, its probably a reband of a JG with trades added.

Theres defiantly no way that its steel

i'll probably go for the jg then seeing its 20 bucks cheaper

Its up to you, but i would lean towards a better brand. You will almost definatly have to modify the JG body to fit your G&G

in what way?

Cheap brands tend to have low tolerances for parts, The odds of everything fiting perfectly are low.

Sure, tollerance issues are a possibility with any brand, but higher quality brands have better quality control, and have a better chance of working better.

Curious on where you plan on ordering all this stuff if it isnt from the States.

i'm not sure :)

Controlled items being "20 bucks cheaper" in the States mean almost nothing if you are looking for it in Canada.

hey what about the upper reciever threadings? are the the same? or is one metric and one imperial?

to my knowledge all recivers except G&P use the same threading.

But seriously, before you make a big deal about picking out a body, i recomend you find a source for it first.

naa i think he's gunna try and smuggle it ;)

lol, yea, it seemed pretty obvious to me too, but i figured calling him on it would just be cruel. :P

ya that's my plan. but i'm still thinking about it tho. but yeah it doesn't take a genius to figure it out :) :p

ill tell you this one time and one time only before you blow a hundred bucks down the drain

it WONT work

there, I gave you the warning, dont say you werent aware of anything.

you don't even know my plan :p

i actually don't know that i'm gonna order it, probably only gonna get other upgrades from the states like a gearbox, scope, etc. i'll probably wait until i can get AV'd to get a metal body

airsoftgi told me that it's not steel and not g&g compatible, so i'll go for the magpul one. is it compatible? http://www.airsoftgi.com/product_inf...oducts_id=3255

couldn't tell you off the top of my head, although i doubt you will get much advice here after you openly admited that you were planning on smuggling it...

Just sayin'