This is P90 thread
 

Hell, we have all other models of guns, so why not a P90 thread?

So here's my piece - an Echo 1 E90. In this pic it's mounted with a Bushnell holosight (real holographic, not RDS) modded with a home made "hood" to look like an EOTech, and a G&P M3 light. The light will eventually be replaced with a proper light for a P90.

I have a friend coming over in a couple of days with a good DSLR and tripod and he said he'd snap some good pics of my guns, so I'll have better pics up soon.

http://www.societyssorrow.com/_crunc..._Holosight.jpg

Now let's see yours...

Hell yes, about time. Nice piece, how'd you make the sight?

I think theres an FN thread, and technically a P90 is made by FN :)

http://i88.photobucket.com/albums/k1...DSC_0108-1.jpg

http://i88.photobucket.com/albums/k1...ofIMG_2119.jpg

http://i88.photobucket.com/albums/k1...v/IMG_2125.jpg

I bought the Bushnell sight in the classifieds already modded. It's a good job too. I compare it to my Huang and Hurricane 552 sights, and it looks pretty convincing, although it's of a thinner metal than these other sights. Still pretty strong though.

And yeah, I guess there is an FN thread. Never thought of that. But still, the P90 is "special" and deserves its own thread. :p

I love how his finger is on the trigger and pointed right at his buddy in the first pic.

Whereas in the 2nd picture, his finger is even more tightly wrapped around the trigger, although pointed at the ground. Too busy looking cool.

lol, ouch illusion, ouch. it was hard getting used to indexing a p90

I'm still trying to decide if I should index and keep my middle finger on the safety or keep my trigger finger on the safety.

LOL. It's true. It's alright. If I had a cute girl standing beside me, I might be gripping on to things a bit tighter as well... LOL.

I index my trigger finger to the safety, even though it's a bit higher. My hand actually hurts after a full day of playing because of that position. It's the weird angle that the grip cocks your hand in.

Otherwise, still one of my favorite CQB guns... even though I haven't used it in a while.

Is that your collection?? :O

haha no i wish. only the p90, m4, mp5 sd and usp are mine, the rest are the Niagara boys.

Damn, me too. My wrist hurt as hell during and after the game. Last game, it hurted for 2 days straight.

I just intex my finger straight, above the trigger. It's more confortable to me that way.

Pictures are on the way. I'm out of time to post now.

What is this creation on your top rail? A NV rig?

that would be an aimpoint with killflash with one of them rubber covers am i right do i win a prize lol

It's a NVG monocular modded to fit a rail.

Combined with the tracer unit I can to out in the dark & play Baghdad bingo.

Some pics of my P90tr.

350fps
Custom J batterie
Custom one point sling
Aimpoint Comp 2


http://aqar.no-ip.org:8080/bdu-%C3%A9quipement_01.jpg
With the uber big ass surefire that I no longer use on it.

http://aqar.no-ip.org:8080/carabine-1.jpg
In my collection.

I now run a smaller surefire on it. a 6P LED Defender. But after watching the Magpull Dynamics DVDs, I'll look to add a double light clamp and add another surefire on it just for kick. I tried it one time and it rocked.

Finally can put my newly acquired P90 up on here. I present my P90 with a stereotype Call Of Duty/Video game setup (Reflex sight and Silencer)

Enjoy

KS P90 (EDIT: Echo1 Actually rebrands this gun)
NCStar DAB Red Dot
H&K Pro Silencer (With custom created inner foam barrel)
Mad-Bull Ver II 6.03 tighbore barrel
Custom L-shape 9.6v 1600mAh Battery

On a side note, I really hope this isn't EVERYONE on ASC that has a P90.

Actually, it's the other way around, Echo 1 rebrands the KS P90...but anyways it's gorgeous!

how is it holding up? I still have my eyes on one and would like to have yet another opinion on it (can't hurt right? :D)

Oh cool that's really good to know now :) um it runs amazing, I'm the second owner and it still runs perfect on the stock inners minus the barrel. Shoots so accurately almost to the same level as a m4.

I suggest the KS or Echo1 if you want a good all round gun for outer and internals

TM for great/outstanding/the best internals

CA Proline (clearsoft and the Original full black) if you want a brand new P90 since its canadian legal now since the upper receiver is made transparent. Still has a great feel and it has a good set of inners, including a very accurate inner barrel to use with the silencer.

Anything else I suggest you stay away like Well.

Prices range at $400+

It really comes down to if you want a used or brand new though and what your looking for in the gun/ what's available in the classifieds haha

Good luck!!!!

Work in progress.

http://img.photobucket.com/albums/v332/mrsamson/P90.jpg

QD silencer needs to go.

That entire contraption up front needs to go.

No worries... this will serve as a field gun with the 433mm promy. I am working on a separate gearbox and upper receiver for CQB duty.

Agreed, The front RIS ruins what makes a P90 a P90.

P90s are supposed to be KISS.

Why get a P90 if you dont want a to use a P90?

'cause I like my rails. Beside, why limit the P90 to close quarters if you can do both with a simple upper receiver/barrel swap?

hey, its your gun. Do as you want with it. But your posting it in a public forum, so expect a public response such as my rant below :

I just will never understand why people insist on taking a gun that is not designed to do the job at hand and bastardize it so that it can when there are god knows how many other models/designs out there that are designed with that particular purpose in mind.

And dont say "because I like the p90" because you obviously dont if your changing every visual aspect of it. Since airsoft guns function internally the same way regardless of model, you cant say "due to functionality."

Thus far Ive heard every excuse that essentially is designed to hide the fact that they were either drunk or knocked up retarded when they thought it was a good idea to shove a plethora of rails up the crotch of a P90.

You ALREADY have a TR (which is bad enough) with 3 rails on it, why the hell do you need another 4? to make 7 rails?!
You dont NEED 7 rails to hold 1 dinky flashlight (I refuse to call that a taclite)
and if you want an M4 Barrel... get an M4.
Dont just shove crap on front of it to hide an m4 length IB.

Then you may as well get the Civilian P90, which looks like the bastard child of a P90 and an AUG on viagra.

/rant

^Very true, too add on

If it aint an official attachment they make for the real P90's in my opinion it does not belong.

However whatever you do with you P90 is fine by me, I hate P90s with ACOG scopes and such, I think they look weird on the gun but hey, its preference.

The only RIS system I loved is a custom one someone made on herea while ago

Keep in mind, P90s are made for more CQB or close combat situations. If you want an assault rifle version of this gun, pick up a F2000 :D

hey DarkAngel, I wants to see some pics of your P90! There's ain't enough photos on this thread

That's Guardian's P90, hes a resident on these boards. Its one of the Few Custom mods (especially P90) that I actually admire in both design and craftsmanship.

Ill take some high rez pics of it when I get home. I was hoping to get a professional to do my armoury as im no photographer, but fuck it.

Ill post up specs for now. Its currently my Night Game/NVG Setup for CQB (Non Silenced)
I have an MP5A2 (Silenced) for my silent night ops.
My TM P90 was one of the two New Type P90's to come into Canada, one went to me, the other went to A&A. I picked it up RIGHT after the P90 drought started and after they started manufacturing the new types. In essence it was one of the first of its kind in Canada.

TM P90 RDS (New Type), with Side Accessory Rail
G&P P90 Metal Upper Receiver
Guarder Clear Hop up Rubber
Guarder P90 Cylinder Head
Guarder P90 Cylinder
Guarder Polycarbonate Piston Head
Guarder SP90 Spring (340-350fps)
Guarder V6 Reinforced Ball Bearing Spring Guide
Modify Nozzle
V6 Sorbo Pad type II
TM Gears (No reason yet to change em)
TM Piston
TK P90 Twist Tightbore
Sentinel Arms Custom low-resistance wiring kit.
Systema Metal Bushings + Shims
Systema Turbo HS Motor

M6X Taclite + Laser Combo
IR Filters for NV Operations.
First Factory Sling Adaptor
Milspec P90 Two Point Sling

I also have the First Factory Top Rail (replaces the RDS to allow for different optics) but I rarely use it, as I prefer my NV Equipment to be head mounted and the RDS works fine for me.

J-batt mod has been performed and currently is running either a 9.6v 1700mah JBatt Minis but I also have 11.1v lipos which i dont usually use because the Jbatts have the right ROF that im looking for.

I can empty a full 68rd TM Lowcap in 3 seconds flat.
Its my ROF Beast. Just like a Real Steel p90.

Edit. Pics Uploaded.

I have the rails and everything for my P90 and I gotta say, its annoying as hell. It gets too heavy and it doesn't feel like a CQB anymore since its alot longer with the rail system and the silencer. I take it off when I play at Xtreme Tactics, but I put everything back if I just wanna show it off. I mean it does looks nice and all, but I just prefer playing without the rail system.

@DarkAngel: what is up with the hostility??? I get the P90 purist rant and all. Now with the taclite rant... might be right though, its a cheapass lite but it serves its purpose.

Thanks for the reminder :D. Btw, you do use your P90 in open field/ skirmishes right?

Theres no hostility towards you. None whatsoever.
I am however duty bound to the airsoft church to crucify and exsorsize that abomination of yours

No, I dont use SMG's with short barrels for open fields. Thats just retarded.

Theres a few sayings that I like to say.
"Use the right tools for the right job."
and
"If all you have is a hammer, every problem looks like a nail"

Pics Uploaded

With that setup you have it is clearly built for CQB. But then again I see the P90 as a versatile airsoft rifle, one that can be used for CQB and the other for open field with the appropriate setup. Again different point of view for different user.

Don't worry about abomination thingy, as stated in my previous post that I am working on another receiver for CQB specific setting.

See theres the problem right there. A P90 is not a rifle. its a SMG.
Its like putting a bipod on a pistol. It may be "versetile" to you but its still bat shit retarded :D

Well...it's an intermediate cartridge.
FN also just happens to have made a pistol that uses it.

prettysure the P90's being discussed here fire a 6mm BB. It just drives me crazy when people go "well the real one!..." it's dumb, it's still an airsoft gun, hearing people argue over what gun is better in the safe area during game's is quite laughable, they'll have two seperate gun's with the exact same gearbox and motor, same rof, same fps but they'll constantly draw thing's in from their real steel counterpart. (range, penetration power, recoil etc)

I have to agree with Darkangel (lol we get along pretty well these day's I've noticed :D ) you buy the gun for that gun, turning them into other thing's is stupid, all this being said, the real p90, make's a shitty field gun, the airsoft gun does also, there are a few where I play and I even bought one (and pput it back into it's qb form) and they've all been outmatched, and with the silencer and barrel they end up just as long and heavy as an m4. you don't have to get an m4, just turning a p90 into a field gun is an oxymoron considering what you have to spend to get it there and how much weight you add to it all.

My bad for the spelling slip and thinking that a properly modified P90 can be used both as a CQB and field rifle. I guess my quest for a lightweight, compact, decent accuracy and range, easy to disassemble and maintain AEG is a bust.

Agreed, stick too the F2000 if you want a P90 Assualt rifle.

THAT's WHY FN Herstal ORIGINALLY made it!

If you want to put a M4 box feeder on your P90 and a RIS then go for it. I just hate those two add ons as thats what every person thinks people should have when you fully upgrade your external look of the P90.

Also, P90s are built for smaller built users, sorry big guys ;)

And DarkAngel, thank you, thats a pretty sexy setup you have going there.

ya but this is airsoft, not real life. maybe he likes the way it feels and doesnt want to buy 2+ guns for every situation. plus p90 airsoft guns are some of the most reliable ive seen and used so maybe thats another reason he wants it for outdoor and indoor. LOL i hope to god no one puts a bipod on a pistol and tries it even with airsoft jesus christ haha

okay so if he wants a good CQB and outdoor P90 then UPGRADE YOUR Inner Barrel.
That's P90 Upgrade 101 in my books.

Keep the stock barrel for indoor and your new inner for outdoor.

My only gun is a P90 and I'm happy with it for Outdoor usage.

I don't see how the RIS system helps other then you get more rail space for a Laser/Flashlight Unit box, Holosight/Elcan setup, scope setup, etc. In that case then it is understandable to get one as there is no way you could fit all that on your basic P90 Rails.

But for a grip? The P90 grip is probably the most effective thing your can get when it comes to maneuverability. That's if you are of a small built... If you aren't then I question why you got a P90 :p as it would be like myself (I'm 5'6") getting a LMG (M249 Saw or ChainGun). Just would look more fugly and messed up then ever.

Guys, as stated in my previous post. Hes free to do whatever he wants.

But as stated in that same very post, if he posts pictures/details of it on a public forum, he should expect public responses. Whether he likes those responses is a different story, but either way, hes free to do as he pleases.

Same goes for my photos, if someone wants to knock it, thats fine with me, I posted it up on the boards, and I fully expect/understand that some people may not like it as much as I do and they are welcome to post their opinions on the public boards.

The point has been made, lets get back on topic.

Point was taken immediately with my first reply, just got derailed when you decided to go on a with your SMG rant. But yeah its getting old, lets get back to the topic and hope we can build a good P90 user base in ASC.

P90 users can start posting their current specs, plans, etc.... + more photos.

Here's to hoping to skirmish/meet other P90 users in the field/cqb and have a decent chat, this includes you DarkAngel since you have a nicely modded P90.

Well I guess I'll update my current P90 set up I have now after a couple fixes I made as of late with regards to my gun's Gearbox.

KS P90 (EDIT: Echo1 Actually rebrands this gun)
NCStar DAB Red Dot
H&K Pro Silencer (With custom created inner foam barrel)
Mad-Bull Ver II 6.03 tighbore barrel
Custom L-shape 9.6v 1600mAh Battery

New items:
9 bulb LED light with side mount
Modify Polycarbonate Piston (Full Teeth)
Modify Polycarbonate Bearing Piston Head
Modify Enhanced Cylinder Head - V6
Modify Stainless Steel Shims
Guarder Clear Hop-up Set

Once I get a better cash flow going I will upgrade the Guarder, and nozzle.

So pretty much I am left with the Stock KS V6 Gears, and Cylinder.

Got all my upgrade parts from Airsoft Parts :D

I would have taken photos of my gearbox, however after opening it over 100 times and staining my hands will lube and grease, I'm going to leave it closed and in my P90.

I was thinking the same thing. I think at Green Zone a month or so ago we had most of the P90's users attend, however, we never really contacted one another about a meet.

Here are mine:

The former was my first P90... 4 years ago.
The later was my second P90 last summer. Sold it when I lost my job.

Excuse the crappy picture quality, cellphones where not that great in that time.

TM P90 TR
Externals: TM silencer, Tasco RDS, custom 2pt sling.
Internals: Stock everything except Guarder metal bushings, shim set, Guarder tappet plate, Guarder air seal nozzle, Systema M100 spring.

http://i104.photobucket.com/albums/m...DSC00036-1.jpg

TM P90 RDS
Externals: Gemtech G5 QD silencer and hider, custom 1pt sling.
Internals: Modify gears, Modify bushings, Modify cylinder head, Guarder polycarbonate piston head, Modify air seal nozzle, Madbull tightbore (P90 length), Guarder metal bearing spring guide, Modify M110 spring.

http://i104.photobucket.com/albums/m...02-09_2103.jpg

Firefly P90 Front Mount

http://www.uncompany.com/pageproduct...sp?prodid=5730

What the heck does this look like on a P90/where does it go?

Inside the Upper Receiver. Its what your flashhider screws onto.

You dont actually see it cosmetically as its buried in your receiver.

I didn't think the flashhider screw could be replaced.

On the TM body no. The grub screw is inside the receiver and the receiver has to be destroyed to retreive the grub screw.

or you cn get another grub screw and rethread ur metal receiver, which is what I did.

I like it...Also, nice touch with the PRC patch.

How is the stock gears holding up? I am waiting for my parts to come in and I also decided to stick with the stock gears.

Btw, why use a stronger spring and longer barrel as I thought your going to use it as your primary CQB weapon?

now you need a sling swivel for your P90 najohn... trust me it sucks carrying it all the time

I got some sling made by dragon something that came with the gun.

It works well with my vest too, when I'm not using it I can hang it between my mag pouches in the middle of the vest and quick draw it when necessary.

like what they use on SG1 ?

So... all I've seen here is P90's with silencers... do they not make the barrel extensions for them? Or are they just too expensive?

yes they do but the extension is the civilian look that most are not too fond of.

PS90's are eghh. I mean if you want one though don't let anyone stop you. I wanted to put iron sights on mine like COD except I cheaped out and went the red dot road. I say if you can make you gun different the anyone elses in anyway, that's a plus.

And evil_yd if you mean is this the gun they use on SG-1? yes. If you meant is the sling I have the one they use on SG-1? then no. They use a custom sling that is like mine but has a detachable buckle and wraps around the back of the entire gun (you can probably find photos of one here or on goggle) Only guy I saw who makes one of those is thevestguy.


EDIT: Yesterday's game at FR went well, 4 guys (including myself) were wielding P90's. All different looks, none were th same, it we pretty cool to see. Anyways one thing I noticed is that I am the only person with a dump pouch for my mags. Everyone else used their pockets or mag pouched which I guess could be a pain. What do you P90 users usually use?

yeah Najohn i was talking about the sling, i already know that SG use the p90 with red dot. i'm probably going to get a P90 this winter, at first i thought i would get a Scar or F2000 first because of my post on finding a suitable AEG but i originally wanted a P90 and thats what i will get, i'll probably just put a reflex red dot on it and get MAG brand midcaps. Do the MAG brand midcaps work with the Classic army P90 ?

wait who was the other guy nahjohn?

Oniwagamaru, other guy lol


Mid caps for p90s have been on and off success wise. Some have good success with them, others have epic failures.

wait so the guys name was other guy? theres me , you, linh, then who?

Ghost team member. He had a beautiful gold silencer and holosight on his P90, but ran with just the silencer for the rest of the day.

I hope that was sarcasm b/c my quest for a lightweight, compact, decent accuracy and range, easy to disassemble and maintain AEG is almost complete, just need to get a working MOSFET and rewire to deans and my p90 will be whole! And those rants about SMGs vs rifles are useless in airsoft, b/c rifles like the G36C has the same length inner barrel as the p90 a SMG, hence similar stock performance.

That would be Talon borrowing Solomance's P90.

Ps3p90
 

http://img835.imageshack.us/img835/993/dsc03807.jpg

The 2 best things in life X2! Mine's the bigger one on the right ;)!

I'll have you know that mine is actually taller now that I have my new Thread adaptor

Hope there are more people that have gotten P90s

I have been wanting to forever, just never got around to it.
G3s take priority ^_^

Might have get one over the summer for CQB, so I have more then 1 CQB weapon.

I like mine with a stubby suppressor... ill see your babies at the game!

i re-fell in love with my CA p90 the other day. sat on my book shelf since summer. now i cant let it leave my sight. made a DIY sling using pics i found around Google. might post a tutorial up if enough interest.

oh please do... i need a sling!

Definitely worth the buy
Silencer or Flashhider? hmmm I can't decide

silencer.... but yeah if u dont like your flash hider i dont have one so.... hahaha

Flashhider for your rds receiver then sure ;)

wanna commission me? XP pics will be on tonight



seems fair trade XP


SPY CHECK!... er i mean.. Pics here!

for those who want a sling, please PM me. Note that there are rough spots as this was made on a whim. i have a new one being made.

I count 5 right now with P90's coming out to the game Saturday, Linh, Shell, Marvin, myself and skittles who I haven't played with in years. All on green too :p

Sling looks fine to me Shell Shock, I'd say it is better then most SG-1 P90 slings that actually wrap around the back buttstock plate, I hate that, looks too awkward to shoulder.

sling me a new one
 

actually, this doesn't go around your shoulder at all (unless you want to) the way i designed it was to promote comfort by having the straps align on your breast bone and then go around your neck. though (with most 90 slings) you cant run without holding it (though why would you not want to hold that sweet sweet piece of airsoft XP. thanks for your comment man, means a lot coming from another p90 user, though.. thats why i posted in this thread :3

I'll be ready with the camera to take a picture of the 5 noobs who bought an ugly block AEG :P

shut yer mouth bohy!

I just got my p90 on friday morning last week, gamed it at xtreme tactics on sunday for a couple of games and loved it, unfortunately i have the TR version, but ill make due.

I definately need to get a dump pouch made up for it, or buy one one off the vestguy. I havent got any optics on it atm, but ill be working on it a fair bit over the next few months, ill get some pics up when i get a chance.

On a side note, i did grab a couple of mag pouches for the p90 mags, but im finding the feeding nozzle that drops into the hopup tends to catch whne removing the mag from the pouch, anyone have any reccomendations, or a tip on the preferred way to store the mags in the pouch to give a smoother draw?

whats wrong with the tri rail? XP

i just prefer the rds version to keep the profile a bit lower on it is all

ahh, all is clear now.

Companies need to start making the New TR P90's


http://www.fnherstal.com/index.php?i...ash=0524cbd7a4

UGHHH I WANT THAT FLASH HIDER TOO!!!!!!!

while i do like the uper, i am not a fan of the flash hider, prob just the pic

My CA p90tr. Nothing special.
http://i77.photobucket.com/albums/j4...x/DSCF3782.jpg
http://i77.photobucket.com/albums/j4...x/DSCF3781.jpg
http://i77.photobucket.com/albums/j4...x/hpim0857.jpg

whats your upper made of? also.. looks like CA didnt put a serial number XP (or is it just the pic?)

hrm so rather than spending tons of time looking around for a ris upper im gonna stick with my tr upper, but im having a heck of a time deciding what kind of optics to put on it, preferably nothing bulky, ive found a few forums online where people are using aimpoint t-1 micros and like it, and ive heard ppl seem to really like using eotech clones.

any options or suggestions?

I've always wondered how mp7 flipup sights (when down they are pistol sights) would work.

No upkeep on those (battery/lense covers/issues with condensation).

The upper is some sort of heavyweight metal, make echo1/ks feel like plastic. Trades are not %100 there but that does not really matter to me. Had a TM p90 once, like this better.

I was thinking this too, but am going the 416 iron sights route now, aka classic COD p90's :D

Don't copy me any of you

bleh cod < r6v2

if i could get my hands on the white double ring sight for my p90 like the real steel has i would, but ive already been checking into that and would have a hell of a time getting one

ewww i like my RDS.

Iron SIghts dont fog in the snow lol

nor do decent reddots

That is true I guess.

Id rather this http://www.ebairsoft.com/more-replic...ck-p-2541.html
Than a t1 but if you do go with a replica t1 make sure it's a decent one because some of then you cannot adjust.

man, i envy all of you. all i got is my old walmart brand clearsoft red dot. in anticipation of this sats' FR game, fog treated it. lets see how that holds up. works surprisingly well as a quick aim and shoot sight.

thats on my p90 accessories list next, cmore sight

my baby, ive become a bit of a stargate* nut so i think im gonna name it gate,
also because i loved the x-wing novels by aaron alston and mike stackpole, wedge antilles astromech droid is named gate

dorky i know, but meh me likes it


not a lot on it yet cept for my laser sight

gonna be getting a light for the other side, and like previous posts said im trying to figure out what kind of optics i want on it, for something like the p90 the open sights work really well im sure, i dunno ive just never been a fan of the look of open style sights :-P

i likes ^_^ viva la TRs!

good lord man what are you doing playing in the snow? if we tried that here in winnipeg i dont even wanna think what would happen to our aegs in the middle of witner

yup snow games, awesome