Linton LT-6288 Radio - Review
 

Hey Guys,

I recently picked up a Linton 6288 radio off ebay and thought I would do a review.

LINTON LT-6288 UHF (420 ~480MHz)

I bought it off a ebay retailer, after reading Crunchmeister's thread about a decent radio that I wouldn't have to shell out a fortune for. This is a UHF Radio, there are some legalities of using one, if you don't like it, keep it to yourself. If you wish to contribute info, then please do so, maturely

Retailer I bought it from:http://cgi.ebay.com/ws/eBayISAPI.dll...m=320189250754

I paid about $85 shipped to my door, the retailer classified the item as a toy so I didn't get dinged for duties by CBSA.

What I got with my package:
1 x Linton 6288 Radio
1 x Battery
1 x Data Cable (for easy programming of channels)
1 x Desk Charger
1 x Programming CD
1 x Instruction Booklet (In English)

http://i106.photobucket.com/albums/m...IMG_0010-4.jpg

First Impressions:

This is quite compact and I would say pretty cool looking. Its a 4 watt radio, I believe the max is 5 watts for hand held radios. It comes with a short nubby antenna and a metal belt clip which is held on by two screws into the body of the radio. I personally like this feature, it keeps the clip firm and secure, and you will not have to worry about loosing your radio to whatever its clipped too, unless you take a big tumble, even then, I doubt it. The clip is option, you can run without if wish, it also has a hole for a strap, which is provided, again optional. This radio is built pretty solid, doesn't feel cheap, nothing wiggles or creeks, but I wouldn't use it as a hammer. I am confident it can easily withstand bb impacts, the LED screen looks to pretty strong and thick, it does not flex at when I push at it with both thumbs. The LED screen has a blue back light, and the keys light up green when you push the light button, makes is very easy to use in low light conditions.

Programming:

I bought one with a data cable, your computer requires a COM Port in order for it to work, you plug it into your computer and hook up the other end into the speaker/mic connections. After installing the programming software all you do is punch in the frequencies you want. I used the frequencies found on board here: http://www.airsoftcanada.com/showthr...&highlight=uhf

Programming on with the software if extremely easy, all you do is punch in the numbers. After punching in the numbers and transferring the data to my new radio, I took my old GMRS/FRS Radio to see if it worked. I tested it with several channels is it worked perfectly.

You can also add in your own custom channels if you wish if you are part of team, I haven't done this yet.

Im not sure how easy it is to punch in the frequencies manually, however, after speaking with Crunchmeister he said it quite easy, just a bit tedious.

On the Field:

I fielded it at Border Wars II and it worked flawlessly. I had no problems with communicating with other radios. I was using a ear bud head set, and a external mic. The Linton 6288 uses standard Kenwood 2 Pin, so your variety of comm setup is quite vast, I was planning on picking up a Calvary Headset, but I found a better deal. At the end of the day, I found out that I had accidentally left my back light on the entire day, yet my battery was still going strong. I didn't really measure what kind of range I could get with the radio, but I didn't have any problems transmitting or receiving throughout the whole field, it is more than enough for airsoft purposes.

Overall impression:

This is great compact radio, for those looking for a budget radio. My entire setup, including radio, headset and mic was about $120. It is a bit expensive, however, I don't see myself ever buying another for a very long time, unless I loose it. Looking at standard radios being sold at Best Buy/Future Shop, your looking at about $70-100+ for a set of motorola talk abouts. I've only had this radio for a short time, but so far a I like it a lot.

Pros
- Relatively Cheap for a UHF Radio - $85 landed
- Kenwood 2 pin - Vast variety of comm set up
- Compact and seems very durable
- User Friendly

Cons
- China made, pretty sure it doesn't meet FCC standards
- you may require a license if you use certain channels
- no long term warranty, if it breaks your SOL.

Feel free to ask any questions and I will try to answer them the best I can.

Linton 6288 beside a Midland GTX 600 5 Watt Radio next to M4 Mag for size comparison. I forgot to mention, the antenna is detachable.
http://i106.photobucket.com/albums/m...IMG_0003-8.jpg

Metal Belt Clip held on by two screws - feels pretty solid
http://i106.photobucket.com/albums/m...IMG_0006-7.jpg

My current setup
http://i106.photobucket.com/albums/m...IMG_0009-4.jpg

Update: A few more things to add

After consulting the manual a bit more, is it easy to switch between two channels, pretty much a push of a button

- there also an option to set radio power level at high(default) or low if you which to conserve battery, there is also an option for automatic radio shutoff if you do not receive or transmit, or push any button within two hours. It signals a auto shut off with several beeps, good in case you accidentally leave your radio on.

- it has a built in stop watch, lol

If you're talking about the 14 FRS and GMRS frequencies, you only need a license to operate on the GMRS frequencies in the US. They're free to use in Canada.

I believe so. I'm not sure if im doing it correctly, but I can switch between 2 channels at the click of button, or two as my keypad lock is usually on.

Ah I didn't know that, well Ill just leave it up there incase people decide to use in the US as well.

I totally second everything in this review. I don't think I could have said it all any better. I also fielded my identical radio at BW with a Cavalvy Elite II headset, and it performed remarkably well. Reception was loud and clear, with extra emphasis on the loud part. I had to just barely turn the volume on with the headset or it was almost deafening. Despite getting hit with BBs on my radio pouch on 3 separate occasions, it performed flawlessly and shows no sign of damage.

Just a note on the programming - I would recommend that even if you use the software to program it, you should at least try to program a couple of channels manually so that you know how to do it. If you show up somewhere on game day and your team decides to run subchannels or customs frequencies, you're sort of screwed if you don't know how to program your radio.

Also, when it comes to range, I was receiving loud and clear from opposite ends of the field. When I was a POW and held at the American base at the far SW corner of the field, I could clearly hear transmissions from my CO who was at the opposite far NE corner of the field at the Canadian base. So if it covers that kind of range clearly through that thick brush, I think it has a much longer effective range that anyone would ever encounter on an airsoft field.

And to quantify what I meant when I described the programming to T_A_N_K as "tedious". A single channel (once you know what each of the 9 channel settings are for and how to navigate through them), can be programmed in under 30 seconds. Doing that 22 times while trying to figure out how it works with its rather vague instruction manual takes some getting used to. LOL

But yeah, if you need a decent radio and don't want to have to break the bank to get high end radio features, this is it. For the price, it surpassed my expectations and I would highly recommend it to anyone considering a reasonably powerful, very vesatile, programmable UHF radio. For this kind of money, I see it as quite a deal. If it proves itself in terms of longevity, this could be the ultimate airsofter's radio.

You can just key in the channel you want (01-22), and you're there. I forgot how to lock my keypad, so it was open all day. But the buttons are recessed enough that they're not easy to push accidentally if the radio is in a pouch. I believe there may be another way of rapidly switching channels, but I'd have to dig out the manual to be sure.

You push the button with the big KEY Picture above it Crunch :P its also blue, also I was the guy you informed my mic was transmitting cuz you could hear me :P.

Any other neat info to contribute?, I only really know the basics of the radio, I have yet to program channels in manually. The only thing right now that might be a factor is how water resistant it is, I suppose thought if it was pouring pretty hard I won't leave it exposed.

The way I did it is, I would be on a preset channel, in this case 3, and then I would push the "V/M" button to go into VFO mode, and manually punch in the actual frequency of channel 19(462.650). Pushing the "V/M" button again would bring you back to last channel used in your stored channels, which would be 3.

Roughneck has the Linton 5288 which is a very similar radio (I couldn't find the 5288 on ebay, so got the 6288 instead). He said his has seen many games, some even in the rain, and it's still going strong. However, I'm assuming that it's in a pouch in his rig somewhere and not on his belt and exposed. I'm quite sure that in my radio pouch, it would be fine in the rain.

Cool. Very handy when you're switching between your squad-level and command channel.

How do you like your Calvary Setup? I was going to grab one off shadow, but I think you snagged it.

LOL Yeah, I was the one that snagged it. http://www.airsoftcanada.com/images/...on_mrgreen.gif

I like the setup a lot. The headset is comfortable, even after wearing it for the entire day. It's well ventilated enough that it doesn't gather much sweat, and it's open enough so that you can still hear your surroundings. The PTT box was at a good position, and I easily ran my wiring under my vest. Even with the thick brush, I didn't really get the wire snagged, and my PTT never got pressed by accident.

I don't really have anything else to compare it to, but those are things that I would consider important in a headset, and there seem to fit the bill. Durabitlity is something I'll determine with time....

Yeah Crunch, my Linton has seen 10+ games.. most of them in wet conditions. I keep it in a radio pouch on the back of my rig. I just set the channel, key lock it and toss it in the pouch for the day. Never any issues. The only problem is low power walmart radios on the field, they sometimes come through with nothing but static.

I've left the radio on for a day or two, testing the battery and it lasts. I'm sure with heavy use, it can be killed in a day. As for range, at Border Wars II I was in the US staging area by the cars and hearing radio traffic from the US command post loud and clear.

In short, I dont plan on ever needing another radio.

EDIT: I also use the Calvavy elite, I love it. Clear reception but it doesnt drown out or hinder your local hearing. I have the older style with the large PTT button, when prone or in a firefight, I use the butt of my rifle to hit it.

I found a lot of people had problems with their PTT Box, now im not sure if it was a knock off CAVALVY, or a knock off of a knock off. The ear bud I have is from kenwood, but the mic I was using was a china brand. I might look for another one, I don't want mine sticking.

On another note, do you find your charger to be on the cheap side? Regardless of if my radio is in its cradle or not, the green light is, red if its charging I assume.

Well, I thank you for recommending the Linton / Cavalvy setup, Roughneck. I'm very happy with it and as long as everything keeps working as well as it did on Saturday, I don't see myself ever buying a new radio and headset.

been using a Linton6288 for almost two years now. Very reliable, though the keypad took a direct hit. It tore the button off, but the radio still functions.

We,re running the same radio but we got a few of these in http://www.rocketquality.com/bluetooth.html and they're no too bad.Except for the little lites on them (on/off) for nite games .

I assume those require their own battery source? I hate having something and then having to worry about having the battery dying, do you get any interference at all when using? If there anything like bluetooth headsets for cell phones, I would probably pass.

While the lack of wires is appealing, the idea of multiple batteries (1 for the headset, one for the PTT, and one for the Bluetooth "base") to run that setup turns me off the idea. It is a cool idea, but I would rather be hard-wired to my radio and only need to worry about its battery.

I have a Linton 6288
 

Hello and how are you; quick question, I programmed my Linton to work with my Motorola BPR40; it receives well from the Motorola but won't transmit back. I see the light illuminate when I hit the PTT on the Linton but nothing comes out of the Motorola. What am I doing wrong?

What channels are you using? Did you try all of them? Are you sure you input the correct frequencies? Chances are your frequencies are a bit off that why you can recieve but not transmit. I would try going up and down .5, there not always right on.

Assuming that he did correctly program both radios with the proper frequencies then even if he was a 1/2 channel off, the radio should un-squelch enough to hear something, especially if he's testing them in close proximity to each other. More than likely he's got a PL (Motorola-speak for CTCSS) tone or some other form of controlled squelch (DTMF/DCS/DPL) active on his BPR40. The best test would be to simultaneously depress the MON switch on the BPR40 to defeat its squelch circuit and try re-sending from the Linton. If he is hearing himself, then his Linton isn't sending the proper tone/code burst to open the Motorola's squelch. Back to ye olde programming manual... :confused:

If this isn't the problem, then I'd suggest double re-checking the frequency list programmed into both radios because he's made an error somewhere...

Ready...Fire...Aim!
'Fly

I had this problem its due to the motorolla using a sub channel. For us it was the motorola was using 6-1 and my radio was set to 6. Just make sure the motorola is set to the base number.

I have the LT-6288 but don't have a programming cable and the manual is useless. Does anyone have a simple manual programming procedure for this radio?

Also interested, per above. ^^

So I've been using mine a couple years now with either a Cavalry headset or a throat mike. I unplugged the headset the other day just to use it as a handset and found the speaker is muted. I've followed the instructions and pressed the monitor button to un-mute but no dice.

If I plug in a headset it works fine, I've also tried the master re-set and no dice. I can't long in with the usb cable and adjust this setting either.

Any hints?

This is the very amazing flashlights online at a very good price, https://bestflashlightsreviews.com/

Its like you read my mind! You appear to understand so much approximately this, like agen judi slot terbaru wrote the guide in it or something. I feel that you simply can do with some percent to pressure the message home a little bit, however other than that, this is fantastic blog.