Diu ley.
I hate you sequential. |
Quote:
|
http://farm8.staticflickr.com/7376/9...6e560f40_o.jpg
FALCON 6.03 Type 2 Barrel & A+ Studio Hop-up. It is all installed VFC Original Hop-up Revised Version 2. Gun shoots like a dream. :cool: http://farm8.staticflickr.com/7350/9...5e9e764a_b.jpg S version Rifling barrel , slots inside the barrel. |
When can I see your baby??? Lol
I wanna see how it fire xoxo Quote:
|
Guys help me out for my stock MP5A2 :)
|
Quote:
|
|
Did a Marui Hop-up Conversion DIY on my VFC Mp5 spare hop-up chamber. Now let me tell you... This is one amazing setup!
http://farm3.staticflickr.com/2817/9...65a60025_b.jpg |
|
Hey guys,
I'm in need of a little help here. I've got a A2 through a trade that needs some work. The trigger box has mostly TSC steel parts so it isn't a concern of mine right now. What is a concern is that 90% of the time the gun is failing to feed and then it does the bb's roll out of the barrel. Bolt mods so far are Azimuth bolt guides, nozzle, and cylinder. There is also a TSC steel bolt head. Since installing the bolt guides the bolt gets pinched when pulled completely back and won't release without a slight tape on the ground. I was thinking about taking some fine grit sand paper and taking down some of the paint where it seems to be stopping. Next issue, I believe that my part 12, the bb loading chamber is the older version which may be the cause of why the gun is failing to feed possibly? Where would I go about picking a newer version up from? WGC is currently out of stock. My MP5's serial is KE007220 if that helps in determining what version I have of part # 12. Last issue is the hop up chamber. It's also the original version I believe and doesn't put much if any contact on the BB and the little bit that it does protrude is crooked however I am sure that installed it correctly. I just replaced the OEM bucking with a AST maple leaf without any change. Does anyone have experience with the Future Energy, TSC, or Precision replacement hopup chambers? Thanks for any input |
Quote:
Your serial number is a Version 1 gun. You need to contact VFC for the latest version of hop-up chamber and loading plate. They sell for around 10-20$ for the replacement parts. After that has been replaced you wont have any feeding issues ever. Or you can modify the loading plate and hopup chamber yourself, it is a real simple fix if you have a dermal tool. :D |
Thanks for the reply. Yeah some instruction would be great on the modification of those two parts. Also when ordering from VFC directly, do you use the email: service@vegaforce.com.tw?
|
You can also order from WGC Shop. They have a decent supply of replacement parts, I got my loading plate off them.
|
1 Attachment(s)
Regarding the hop-up Marui conversion here's a better picture for you guys.
|
What mods had to be done to install it?
|
All times are GMT -4. The time now is 10:47. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.