just updating the list..........

Current list............

* Custom PDI 6.01 TBB
* GUARDER STEEL SLIDE AND BARREL (the holy grail!!!!)
* Guarder enhanced Recoil spring
* Guarder Enhanced Hammer spring
* Guarder Steel Recoil Guide Rod
* Guarder High Output Valve
* Guarder Steel Trigger Lever
* Guarder Steel Magazine Catch
* King Arms Air Seal Chamber
* Firefly Rocket Valve and Piston Head Set
* STEEL Magazine Extension
* STEEL Rear Sight
* KJW Heavy weight Frame
* SILVERBACk Laser sight
* Clipdraw Real Steel clip (replaces need for IWB Holster)
* BRAND NEW internals (every single part and spring)
* .30 BB Bastards or KSC Perfects (I have both in .30)

current weight = HEAVY AS HELL!!!!!!!!!!

ok, i got a PDI 6.01 TBB for a TM G26 Advance, cut it down to 74mm, fluted and beveled the end, and it is a perfect fit. its a shame PDI doesnt make a TBB for the G26, but at least i was able to mod one to fit. and i also sighted in the laser, which is absolutely awesome!!!

all i do is point the laser, and pull the trigger, and it is DEAD ON!!!!!!!!!

i will post some dope pix tonight.

Does the kjw frame have full trades?

Unfortunately it does not, but the laser covers that part of the handle :)

ok, found my firing issues, and did a few more upgrades

here was the issue and replacement which is stainless steel (the firing pin is meant for the G17, but fits kike a glove on the 26)

http://i44.photobucket.com/albums/f2...r/IMG_1392.jpg

here is a pic of my RS G27, my tm G26, and my buddy's tm g26 with a plastic slide....

http://i44.photobucket.com/albums/f2...r/IMG_1394.jpg

and a ssmall vid.....

http://i44.photobucket.com/albums/f2...h_IMG_1402.jpg

also, i as actually able to modify these parts to fit in the gun. they arre meant for the P226, but with a little work, theyy fit, and function AMAZINGLY!!

http://www.airsoftparts.ca/store2/im...-set-marui.jpg

current list updated..........

* Custom PDI 6.01 TBB (G26 Advanced TBB, cut, beveled, and fluted to fit the standard barrel)
* GUARDER STEEL SLIDE AND BARREL (the holy grail!!!!)
* Guarder enhanced Recoil spring
* Guarder Enhanced Hammer spring
* Guarder Steel Recoil Guide Rod
* Guarder High Output Valve (customized for better flow)
* Guarder Steel Trigger Lever
* Guarder Steel Magazine Catch
* King Arms Air Seal Chamber
* Firefly Rocket Valve and Piston Head Set (see below)
* STEEL Magazine Extension
* STEEL Rear Sight
* KJW Heavy weight Frame
* SILVERBACk Laser sight
* Clipdraw Real Steel clip (replaces need for IWB Holster)
* BRAND NEW internals (every single part and spring)
* Shooters Design Steel Valve Knocker for Marui G17
* Guarder Enhanced Loading Nozzle (shaved down to accept 2 return springs)

i have had my eye on this, since the piston head O Ring from the Shooters design set SUCKS, i wonder how this would workout?

http://www.uncompany.com/pageproduct...p?prodid=25106

http://www.uncompany.com/images/as-acc-pt013_big.jpg

This thread is crazy.

Good work, man.

thanks man, i am gonna go crazy if i get CO2 to work on this thing.

next, i need to find .89g metal pellets!!! i MAY go with .43's, not sure yet. the .30's are ok, but they don't hurt enough ;)

Lol I take it this isn't a skirmish gun then?

What's your FPS like?

absolutely not for gaming at all, just a challenge to see how far i can go. FPS is tough to say, i haven't chrono'd yet, and likely will complete the gun before i do.

i dont have easy access to a chrono, so its a pain in the butt. coke can chrono = easily done, but i havent been around for a month, so i havent played much. i will do that tho and see.

it shoots far and fast, no doubt!

Well it's a very interesting project.

If I had the funds, man...

Good luck!

thanks, i am having fun with it. i mean, you only live once ;)

Just saw this on your other thread.

Poor hawk, man!

Just for that, I'm shooting a bald eagle =P we'll be even.

lol, the hawk was actually not impressed. i hit it, and it just turned and looked at me, like "are you for real?"

it was creepy, and funny at the same time

did a few more updates.

Current list............

* Custom PDI 6.01 TBB
* GUARDER STEEL SLIDE AND BARREL (the holy grail!!!!)
* Guarder enhanced Recoil spring
* shooters design 150% hammer sprig from a TM G17
* Guarder Steel Recoil Guide Rod
* Guarder High Output Valve
* Guarder Steel Trigger Lever
* Guarder Steel Magazine Catch
* King Arms Air Seal Chamber
* AIRSOFT Surgeon piston head AND LIMITED EDITION SUPER HARD LOADING NOZZLE
* STEEL Magazine Extension
* STEEL Rear Sight
* KJW Heavy weight Frame
* SILVERBACk Laser sight (currently off)
* Clipdraw Real Steel clip (replaces need for IWB Holster)
* BRAND NEW internals (every single part and spring)
* .30 BB Bastards or KSC Perfects (I have both in .30)
* Fully polished outer barrel (finally did the discharge slot side

a little action........... (it is A LOT louder in person)

http://i44.photobucket.com/albums/f2...h_IMG_2101.jpg

and some updated pix.............

http://i44.photobucket.com/albums/f2...r/IMG_2107.jpg

http://i44.photobucket.com/albums/f2...r/IMG_2106.jpg

http://i44.photobucket.com/albums/f2...r/IMG_2105.jpg

http://i44.photobucket.com/albums/f2...r/IMG_2102.jpg

http://i44.photobucket.com/albums/f2...r/IMG_2103.jpg

http://i44.photobucket.com/albums/f2...r/IMG_2104.jpg

http://i44.photobucket.com/albums/f2...r/IMG_2105.jpg