Alright so I am having the same problem as Ross with the BB jamming. I haven't tried lubing that part yet, but if it still jams when lubed, then I may need to trim the rubber chamber down or get a replacement.

Try Frank at velocity arms he is the authorised WE distributor

So I feel stupid for asking this..

I disassembled and cleaned my m4, but when I was re-assembling it, I forgot to put the buffer spring back in. I then racked the slide.. and the bolt is now stuck back. I can't get it out, and the gun cannot be opened. Please help me..

Seen it done. Done it myself. It's the most instant fml moment any WE owner will have.

You have to remove the castle nut, remove the buffer tube. Pop both locking pins (on the body). and wiggle the gun until it free's up.

It is a serious son-of-a-bitch annoyance when cleaning. Don't do it again. :P

Thanks.. that did the trick. Maybe something that could be added in as a side note to the cleaning guides for idiots like me? :)

edit: please delete post.

quick question; I recently got a WE GBBR used from a buddy (it's a lower clear M4 version.)

I just got in the mail a RA Tech NPAS kit (version 2 for WE M4), stinger hop up kit for we M4 and fire pin base w/ valve locker (as well as a TSC charging handle and a thread adapter.)

I also picked up an RA tech hop-up rubber (says for open bolt system/GBBR, but didn't see any rubbers for close bolt - I think mine's a closed bolt) and an RA tech inner barrel.

However, the barrel I ordered is set-up differently than the rubbers. Now, normally I would just tear down the gun to install the Stinger kit to see whether I have the right hop-up, or the right barrel and order the other. However, my upcoming week is extremely busy and I don't think I'll have the time for that, but I'd like to order whatever I need to make it work so it's here for when I do have time.

Now I'm sorry if this has been answered here or elsewhere (or if this question doesn't belong here), but I've seen nothing mentioned, but if it is a new rubber I need, where would I be able to get one for that barrel? I've look all over, ehobby, redwolf etc but haven't seen anything different from what I've posted.

Edit:
Looking more closely at my stinger kit, I noticed a thin rubber ring that looks like it'd fit that barrel, is that my hop-up rubber? (before I had just assumed at a quick glance it was a spacer or a rubber washer of some sort) If so, suddenly so many of the mods I've heard mentioned on the rubbers make sense...

Yes, the rubber ring is the hopup rubber (coulda asked the guy you bought it from :p)

Anyone have or had a TSC Uni Directional Guide Rod in conjunction with TSC Uni-directional Current-stabilizing Steel Nozzle?

Is it better than RA-TECH's NPAS?

Can anyone please confirm a reputable shop that has RAG-WE--013 (RA-TECH WE SCAR full Upgrade Kit) in stock?

I've found some Euro shops that have it in stock, but none I've done business with in the past. And of course Redwolf is sold out.

Edit: Nevermind, found a local dealer :)

NO... they jam.. and have little adjustment latitude.. got one for my SCAR and it sucks

Good to know, thanks Brian.

Well, I finally got my BADASS from Battle Arms Development, I wanted a more robust safety selector, and these are milled from 12L14 bar stock blocks and not cast. So it turns out that RS safeties do fit with some modding.

Did I mention they are ambidextrous and each lever is swappable for a different configuration?

http://img69.imageshack.us/img69/3003/cimg2978p.jpg

http://img651.imageshack.us/img651/9579/cimg2976.jpg

http://img697.imageshack.us/img697/6671/cimg2981a.jpg

http://img401.imageshack.us/img401/1223/cimg2979u.jpg

http://img155.imageshack.us/img155/9412/cimg2980.jpg

what are those....things? lol above the trigger, just below the trades in the middle of the receiver?

anti rotational pins