Airsoft Canada
Page 36 of 68 « First 26272829303132333435 36 37383940414243444546 Last »
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)
-   -   WIP: Upgrading Your Tokyo Marui Glock (https://airsoftcanada.com/showthread.php?t=140496)

Ladyjaja October 15th, 2013 00:39
I just bought a TM G17 for competition racing purposes.

When I press the mag release, the mag doesn't fall down. I have to give it a slight ramp in order for it to drop.

Is the reason for this because the gun is too new and the parts haven't break in?

e-luder October 16th, 2013 00:13
Quote:
Originally Posted by Ladyjaja (Post 1841319)
I just bought a TM G17 for competition racing purposes.

When I press the mag release, the mag doesn't fall down. I have to give it a slight ramp in order for it to drop.

Is the reason for this because the gun is too new and the parts haven't break in?
It's possible.
The notch on the magazine where the catch actually "catches" the magazine may not be properly broken in yet.

either that or the gasses expanded inside the magazine to warp its dimensions such that the magazine is now too large. It's happened to operators before. It could be, albeit highly unlikely, extreme possibility.

Give it a few dry runs of ejecting and inserting of the magazine, making sure that you engage the magazine catch everytime. See how that works...

e-luder October 16th, 2013 13:12
Quote:
Originally Posted by Danke (Post 1840094)
I just put one into the steel Guarder slide I've got on deck.

No one chiming in with where to find spare TM chassis parts yet?
Quote:
Originally Posted by ILLusion (Post 1840079)
I just got a bunch of these Guns Modify G17 nozzles in stock as well. Haven't tried installing any yet, but if they're anything like their nozzle for the MP7, I'd say these are really solid.
Quote:
Originally Posted by turok_t (Post 1839491)
The build quality of these are awesome, and shipping was dirt cheap. Can't wait to install these on my G17's:

So....
how are these fitting guys?

Is the hammer bearing interacting well with the "bump" on this BBU? That is, it's not having problems like the stock one does where the bearing gets hung up on that bump and impedes the cyclic rate????

That's one of my primary concerns about this (or any aftermarket) BBU.
Havent been in the Country as of late so Brian didn't get my order yet. So I haven't had time to test drive these little fuckers yet...

Danke October 16th, 2013 13:13
All the frames are in pieces to re-work the front chassis so the Guns Modify trigger will fit.

Maybe this weekend.

e-luder October 16th, 2013 13:15
Quote:
Originally Posted by Danke (Post 1841796)
All the frames are in pieces to re-work the front chassis so the Guns Modify trigger will fit.

Maybe this weekend.
It doesn't fit!?
really!?

wait... is this the Timberwolf frame set up still?

Danke October 16th, 2013 13:28
I have a few triggers and a few frames. It "fits" but with so much drag he trigger return is null and void.

.Zo October 20th, 2013 12:34
Hey e-luder I need a new loading nozzle but I can't find the AS one anywhere, recommendations?

e-luder October 20th, 2013 13:34
Quote:
Originally Posted by .Zo (Post 1842765)
Hey e-luder I need a new loading nozzle but I can't find the AS one anywhere, recommendations?
http://www.airsoftparts.ca/store2/in...oducts_id=1993

turok_t October 21st, 2013 01:14
Preliminary results for the guns modify bbu aren't looking too well for me. When I manually rack the hammer, the v3 hammer cocks, but when firing, the bbu doesn't seem to push it back enough to cock the hammer for the sear to catch it. But take these results with a grain of salt because there can be many factors involved (ie. gas seal, slide) specific to my setup. I need to do more testing with various parts to arrive at a conclusion.

Sequential October 21st, 2013 02:30
Where did you find these and did they have em for the Hi Capa?

kar120c October 24th, 2013 10:41
Help imstalling AS nozzle and pison head
 
I have troubles installing Airsoft Surgeon nozzle and piston head in my Kjw Glock.
I am not sure from what side the piston head should be screwed and is the stock blue piston must be reused inside the new nozzle.

kar120c October 24th, 2013 11:07
the issue seems to be solved upgrading the piston head with the the Airsoft Surgeon one

kar120c October 24th, 2013 11:53
Quote:
Originally Posted by kar120c (Post 1843962)
the issue seems to be solved upgrading the piston head with the the Airsoft Surgeon one
Sorry, this post should be deleted was for another thread

e-luder October 24th, 2013 14:47
Quote:
Originally Posted by kar120c (Post 1843954)
I have troubles installing Airsoft Surgeon nozzle and piston head in my Kjw Glock.
I am not sure from what side the piston head should be screwed and is the stock blue piston must be reused inside the new nozzle.
The flat part needs to face the BBU.
You can't fit the screw properly if you put the rounded side against the BBU.

So...
The rounded side is the "front" side and needs the screw head to rest on it.

kar120c October 24th, 2013 14:52
Quote:
Originally Posted by e-luder (Post 1700843)
You can fix your magazine catch problem by doing this:

Get a Coke a can. Cut a piece of the side off. Now cut the piece to match the shape of the groove on the magazine catch. Then superglue that badboy in place. Make sure it is as flat as possible.

Do a trial run by stacking as many pieces you need before you glue them altogether. That should create the packing you need to raise your magazine up higher.

The best part is... it only cost you a can of Coke.
Anyone can post a pics of this mod? I can't understand it well, because my KJW G27 suffers this issue


All times are GMT -4. The time now is 09:17.
Page 36 of 68 « First 26272829303132333435 36 37383940414243444546 Last »
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.