this is a good read.... tempted to rewire it to the buttstock and run the vfc bevel on shs 13:1s. Ive been getting good results with vfc bevels and semi terribad angled pistol grips. maybe the smp proj will be on a quick pause :P

I am looking to mod the stock any suggestion or help would be appreciated.
thanks for grip and motor info working on that

http://www.airsoftcanada.com/showthread.php?t=170062

Wiring tip - Do NOT try to rewire the red/black wires on either side of the motor grip. You will destroy your negative lead.

I'm really liking the pre-travel/break adjustment screw. After running the stoner all weekend at the Graylings blacksheep game, I'm thinking I'm going to work on that.

What motor are you currently running? I've re-wired mine to 16awg Milspec but have no where near that ROF ...

You will need adjustment screws on both sides. One for pre-travel to maintain safety and one to modify the break point. You will see what I mean when you start fiddling with it.

Using a Lonex A1 with stock gears. Going to run them until they go, then will switch to 20:1 Siegeteks for a slower LMG ROF.

Some time has passed since Stoner by CA and Ares have been released.
Any noticeable difference between the brands?

Sweet!!

Would anyone know if the box mag of the ares can be used on the ca? Also, if the stock mod can be used as well?